1 |
# RH 2.2.4-20, SuSE 2.3.1-32 |
2 |
%define name %{cross_prefix}glibc |
3 |
|
4 |
# <epoch>:<version>-<release> tags for glibc main package |
5 |
%define glibcversion 2.12.1 |
6 |
%define __glibcrelease 9 |
7 |
%define glibcepoch 6 |
8 |
|
9 |
# CVS snapshots of glibc |
10 |
%define RELEASE 1 |
11 |
%if %{RELEASE} |
12 |
%define source_package glibc-%{glibcversion} |
13 |
%define source_dir glibc-%{glibcversion} |
14 |
%define _glibcrelease %{__glibcrelease} |
15 |
%else |
16 |
%define snapshot 20081113 |
17 |
%define source_package glibc-%{glibcversion}-%{snapshot} |
18 |
%define source_dir glibc-%{glibcversion} |
19 |
%define _glibcrelease 0.%{snapshot}.%{__glibcrelease} |
20 |
%endif |
21 |
|
22 |
%define glibcrelease %mkrel %{_glibcrelease} |
23 |
|
24 |
# crypt blowfish support |
25 |
%define crypt_bf_ver 1.0.2 |
26 |
|
27 |
# Define "cross" to an architecture to which glibc is to be |
28 |
# cross-compiled |
29 |
%define build_cross 0 |
30 |
%{expand: %{?cross: %%global build_cross 1}} |
31 |
|
32 |
%if %{build_cross} |
33 |
%define target_cpu %{cross} |
34 |
%define cross_prefix cross-%{target_cpu}- |
35 |
%define _prefix /usr/%{target_cpu}-linux |
36 |
%define _lib lib |
37 |
%define _slibdir %{_prefix}/%{_lib} |
38 |
%define _slibdir32 %{_prefix}/lib |
39 |
%else |
40 |
%define target_cpu %{_target_cpu} |
41 |
%define cross_prefix %{nil} |
42 |
%define _slibdir /%{_lib} |
43 |
%define _slibdir32 /lib |
44 |
%endif |
45 |
|
46 |
# Define target (base) architecture |
47 |
%define arch %(echo %{target_cpu}|sed -e "s/\\(i.86\\|athlon\\)/i386/" -e "s/amd64/x86_64/" -e "s/\\(sun4.*\\|sparcv[89]\\)/sparc/") |
48 |
%define isarch() %(case " %* " in (*" %{arch} "*) echo 1;; (*) echo 0;; esac) |
49 |
|
50 |
# Define Xen arches to build with -mno-tls-direct-direct-seg-refs |
51 |
%define xenarches %{ix86} x86_64 |
52 |
|
53 |
# Define to build nscd with selinux support |
54 |
%define build_selinux 0 |
55 |
|
56 |
# Flag for build_pdf_doc: |
57 |
# 1 build glibc with PDF documentation |
58 |
# 0 don't build PDF glibc documentation (e.g. for bootstrap build) |
59 |
%define build_pdf_doc 1 |
60 |
|
61 |
# Enable checking by default for arches where we know tests all pass |
62 |
%define build_check 1 |
63 |
|
64 |
# Allow make check to fail only when running kernels where we know |
65 |
# tests must pass (no missing features or bugs in the kernel) |
66 |
%define check_min_kver 2.6.21 |
67 |
|
68 |
# Define to build a biarch package |
69 |
%define build_biarch 0 |
70 |
%if %isarch sparc64 x86_64 ppc64 |
71 |
%define build_biarch 1 |
72 |
%endif |
73 |
|
74 |
# Define to build glibc-debug package |
75 |
%define build_debug 1 |
76 |
%define _enable_debug_packages 1 |
77 |
%if "%{_enable_debug_packages}" == "1" |
78 |
%define build_debug 0 |
79 |
%endif |
80 |
|
81 |
# Define to bootstrap new glibc |
82 |
%define build_bootstrap 0 |
83 |
%{expand: %{!?build_cross_bootstrap: %global build_cross_bootstrap 0}} |
84 |
|
85 |
%define build_profile 1 |
86 |
%define build_nscd 1 |
87 |
%define build_doc 1 |
88 |
%define build_utils 1 |
89 |
%define build_i18ndata 1 |
90 |
%define build_timezone 0 |
91 |
|
92 |
# Disable a few defaults when cross-compiling a glibc |
93 |
%if %{build_cross} |
94 |
%define build_doc 0 |
95 |
%define build_pdf_doc 0 |
96 |
%define build_biarch 0 |
97 |
%define build_check 0 |
98 |
%define build_debug 0 |
99 |
%define build_nscd 0 |
100 |
%define build_profile 0 |
101 |
%define build_utils 0 |
102 |
%define build_i18ndata 0 |
103 |
%define build_timezone 0 |
104 |
%endif |
105 |
|
106 |
# Allow --with[out] <feature> at rpm command line build |
107 |
%{expand: %{?_without_PDF: %%global build_pdf_doc 0}} |
108 |
%{expand: %{?_without_CHECK: %%global build_check 0}} |
109 |
%{expand: %{?_without_UTILS: %%global build_utils 0}} |
110 |
%{expand: %{?_without_BOOTSTRAP:%%global build_bootstrap 0}} |
111 |
%{expand: %{?_with_PDF: %%global build_pdf_doc 1}} |
112 |
%{expand: %{?_with_CHECK: %%global build_check 1}} |
113 |
%{expand: %{?_with_UTILS: %%global build_utils 1}} |
114 |
%{expand: %{?_with_BOOTSTRAP: %%global build_bootstrap 1}} |
115 |
|
116 |
Summary: The GNU libc libraries |
117 |
Name: %{name} |
118 |
Version: %{glibcversion} |
119 |
Release: %{glibcrelease} |
120 |
Epoch: %{glibcepoch} |
121 |
License: LGPL |
122 |
Group: System/Libraries |
123 |
Url: http://www.gnu.org/software/libc/ |
124 |
|
125 |
# FSF source |
126 |
Source0: http://ftp.gnu.org/gnu/glibc/%{source_package}.tar.xz |
127 |
%if %{RELEASE} |
128 |
Source1: http://ftp.gnu.org/gnu/glibc/%{source_package}.tar.xz.sig |
129 |
%endif |
130 |
|
131 |
# Red Hat tarball |
132 |
Source2: glibc-redhat.tar.bz2 |
133 |
Source3: glibc-manpages.tar.bz2 |
134 |
Source4: glibc-find-requires.sh |
135 |
Source5: glibc-check.sh |
136 |
|
137 |
# wrapper to avoid rpm circular dependencies |
138 |
Source14: glibc-post-wrapper.c |
139 |
|
140 |
# <http://penguinppc.org/dev/glibc/glibc-powerpc-cpu-addon.html> |
141 |
# NOTE: this check is weak. The rationale is: Cell PPU optimized by |
142 |
# default |
143 |
%define powerpc_cpu_list noarch |
144 |
Source15: glibc-powerpc-cpu-addon-v0.03.tar.bz2 |
145 |
|
146 |
# Blowfish support |
147 |
Source16: crypt_blowfish-%{crypt_bf_ver}.tar.gz |
148 |
Source17: crypt_freesec.c |
149 |
Source18: crypt_freesec.h |
150 |
|
151 |
Buildroot: %{_tmppath}/glibc-%{PACKAGE_VERSION}-root |
152 |
%if %{build_cross} |
153 |
Autoreq: false |
154 |
Autoprov: false |
155 |
%else |
156 |
Provides: glibc-crypt_blowfish = %{crypt_bf_ver} |
157 |
Provides: should-restart = system |
158 |
%if %isarch %{xenarches} |
159 |
Obsoletes: %{name}-xen |
160 |
Provides: %{name}-xen |
161 |
%endif |
162 |
# The dynamic linker supports DT_GNU_HASH |
163 |
Provides: rtld(GNU_HASH) |
164 |
Autoreq: false |
165 |
%endif |
166 |
BuildRequires: patch, gettext, perl |
167 |
BuildRequires: linux-userspace-headers |
168 |
%if %{build_selinux} |
169 |
BuildRequires: libselinux-devel >= 1.17.10 |
170 |
%endif |
171 |
# need linker for -Wl,--hash-style=both (>= 2.16.91.0.7-6}) |
172 |
# need gnu indirect function for multiarch (>= 2.19.51.0.14-1) |
173 |
%define binutils_version 2.19.51.0.14-1 |
174 |
BuildRequires: %{cross_prefix}binutils >= %{binutils_version} |
175 |
# we need the static dash |
176 |
%define ash_bin /bin/dash.static |
177 |
Requires(pre): dash-static |
178 |
Requires(post): dash-static |
179 |
# we need an ldconfig with TLS support |
180 |
%if %{build_cross} |
181 |
BuildRequires: %{cross_prefix}gcc >= 3.2.2-4 |
182 |
%endif |
183 |
%ifarch %{ix86} alpha |
184 |
BuildRequires: %{cross_prefix}gcc >= 2.96-0.50 |
185 |
%endif |
186 |
%ifarch ia64 |
187 |
BuildRequires: %{cross_prefix}gcc >= 3.2.3-1 |
188 |
%endif |
189 |
%ifarch x86_64 |
190 |
BuildRequires: %{cross_prefix}gcc >= 3.1.1-0.5 |
191 |
%endif |
192 |
BuildRequires: %{cross_prefix}gcc >= 4.0.1-2 |
193 |
%if !%{build_cross} |
194 |
%ifarch alpha |
195 |
Provides: ld.so.2 |
196 |
%endif |
197 |
%ifarch ppc |
198 |
Provides: ld.so.1 |
199 |
%endif |
200 |
%ifarch sparc |
201 |
Obsoletes: libc |
202 |
%endif |
203 |
%endif |
204 |
|
205 |
# Old prelink versions brakes the system with glibc 2.11 |
206 |
Conflicts: prelink < 1:0.4.2-1.20091104.1 |
207 |
|
208 |
BuildRequires: texinfo |
209 |
%if %{build_pdf_doc} |
210 |
BuildRequires: tetex, tetex-latex |
211 |
%endif |
212 |
%if %{build_utils} |
213 |
BuildRequires: gd-devel |
214 |
%endif |
215 |
BuildRequires: autoconf2.5 |
216 |
BuildRequires: libcap-devel |
217 |
BuildRequires: rpm-mageia-setup-build >= 1.104 |
218 |
BuildRequires: spec-helper >= 0.31.2 |
219 |
|
220 |
Patch00: glibc-2.11.1-localedef-archive-follow-symlinks.patch |
221 |
Patch01: glibc-2.12.1-fhs.patch |
222 |
Patch02: glibc-2.9-ldd-non-exec.patch |
223 |
Patch03: glibc-2.11-bz10851.patch |
224 |
Patch04: glibc-2.2-nss-upgrade.patch |
225 |
Patch05: glibc-2.12.1-assign-global-scope-to-RFC-1918-addresses.patch |
226 |
Patch06: glibc-2.9-share-locale.patch |
227 |
Patch07: glibc-2.3.6-nsswitch.conf.patch |
228 |
Patch08: glibc-2.12.1-make-3.82-fix.patch |
229 |
Patch09: glibc-2.2.4-xterm-xvt.patch |
230 |
Patch10: glibc-2.12.1-submitted-translit-colon.patch |
231 |
Patch11: glibc-2.4.90-compat-EUR-currencies.patch |
232 |
Patch12: glibc-2.3.6-ppc-build-lddlibc4.patch |
233 |
Patch13: glibc-2.3.3-nscd-enable.patch |
234 |
Patch14: glibc-2.9-nscd-no-host-cache.patch |
235 |
Patch15: glibc-2.12.1-ldconfig-chroot-aux-cache.patch |
236 |
Patch16: glibc-2.12.1-workaround-shortest-stem-in-make-3.82.patch |
237 |
Patch17: glibc-2.4.90-i386-hwcapinfo.patch |
238 |
Patch18: glibc-2.7-provide_CFI_for_the_outermost_function.patch |
239 |
Patch19: glibc-2.8-nscd-init-should-start.patch |
240 |
Patch20: glibc-2.12.1-never-expand-ORIGIN-in-privileged-programs.patch |
241 |
Patch22: glibc-2.3.2-tcsetattr-kernel-bug-workaround.patch |
242 |
Patch23: glibc-2.3.4-timezone.patch |
243 |
Patch24: glibc-2.10.1-biarch-cpp-defines.patch |
244 |
Patch26: glibc-2.6-nice_fix.patch |
245 |
Patch27: glibc-2.8-ENOTTY-fr-translation.patch |
246 |
Patch28: glibc-2.4.90-gcc4-fortify.patch |
247 |
Patch29: glibc-2.3.5-biarch-utils.patch |
248 |
Patch30: glibc-2.10.1-multiarch.patch |
249 |
Patch31: glibc-2.4.90-i586-hptiming.patch |
250 |
Patch32: glibc-2.3.4-i586-if-no-cmov.patch |
251 |
Patch33: glibc-2.3.6-pt_BR-i18nfixes.patch |
252 |
Patch34: glibc-2.4.90-testsuite-ldbl-bits.patch |
253 |
Patch35: glibc-2.12.1-fix-error-handling-in-Linux-getlogin.patch |
254 |
Patch36: glibc-2.12.1-more-fixes-to-error-handling-in-getlogin_r.patch |
255 |
Patch37: glibc-2.12.1-__getlogin_r_loginuid-fail-if-tpwd-after-pwuid-is-NULL.patch |
256 |
Patch38: glibc-2.4.90-testsuite-rt-notparallel.patch |
257 |
Patch39: glibc-2.10.1-mdv-owl-crypt_freesec.patch |
258 |
Patch40: glibc-2.9-avx-relocate_fcrypt.patch |
259 |
Patch41: glibc-2.3.6-avx-increase_BF_FRAME.patch |
260 |
Patch42: glibc-2.10.1-mdv-avx-owl-crypt.patch |
261 |
Patch43: glibc-2.7-mdv-wrapper_handle_sha.patch |
262 |
Patch44: glibc-2.11-dont-tie-libcap-with-selinux.patch |
263 |
Patch45: glibc-2.12.1-CVE-2010-3856.diff |
264 |
|
265 |
# Determine minium kernel versions |
266 |
%define enablekernel 2.6.9 |
267 |
%if %isarch ppc ppc64 |
268 |
# waitid syscall is available in 2.6.12+ there |
269 |
%define enablekernel 2.6.12 |
270 |
%endif |
271 |
Conflicts: kernel < %{enablekernel} |
272 |
|
273 |
# People changed location of rpm scripts... |
274 |
%define rpmscripts /usr/lib/rpm/%{_real_vendor} |
275 |
|
276 |
# Don't try to explicitly provide GLIBC_PRIVATE versioned libraries |
277 |
%define __find_provides %{_builddir}/%{source_dir}/find_provides.sh |
278 |
%define __find_requires %{_builddir}/%{source_dir}/find_requires.sh |
279 |
|
280 |
%if !%{build_cross} |
281 |
Obsoletes: ld.so |
282 |
Provides: ld.so |
283 |
%endif |
284 |
|
285 |
Obsoletes: ldconfig |
286 |
Provides: ldconfig = %{glibcepoch}:%{glibcversion}-%{glibcrelease} /sbin/ldconfig |
287 |
|
288 |
%description |
289 |
The glibc package contains standard libraries which are used by |
290 |
multiple programs on the system. In order to save disk space and |
291 |
memory, as well as to make upgrading easier, common system code is |
292 |
kept in one place and shared between programs. This particular package |
293 |
contains the most important sets of shared libraries: the standard C |
294 |
library and the standard math library. Without these two libraries, a |
295 |
Linux system will not function. The glibc package also contains |
296 |
national language (locale) support. |
297 |
|
298 |
This package now also provides ldconfig which was package seperately in |
299 |
the past. Ldconfig is a basic system program which determines run-time |
300 |
link bindings between ld.so and shared libraries. Ldconfig scans a running |
301 |
system and sets up the symbolic links that are used to load shared |
302 |
libraries properly. It also creates a cache (/etc/ld.so.cache) which |
303 |
speeds the loading of programs which use shared libraries. |
304 |
|
305 |
%package devel |
306 |
Summary: Header and object files for development using standard C libraries |
307 |
Group: Development/C |
308 |
Requires(post): info-install |
309 |
Requires(preun): info-install |
310 |
Requires(post): coreutils |
311 |
Requires(postun): coreutils, awk |
312 |
Obsoletes: libc-debug, libc-headers, libc-devel, linuxthreads-devel, nptl-devel |
313 |
%if !%{build_debug} |
314 |
Obsoletes: %{name}-debug < 6:2.3.2-15 |
315 |
%endif |
316 |
Requires: %{name} = %{glibcepoch}:%{glibcversion}-%{glibcrelease} |
317 |
%if !%{build_cross} |
318 |
Requires: linux-userspace-headers |
319 |
%endif |
320 |
%if !%isarch ppc |
321 |
Conflicts: %{cross_prefix}gcc < 2.96-0.50 |
322 |
%endif |
323 |
# needs a gcc4 fortify capable compiler |
324 |
Conflicts: gcc4.0 < 4.0.1-2 |
325 |
%if %{build_cross} |
326 |
Autoreq: false |
327 |
Autoprov: false |
328 |
%else |
329 |
Autoreq: true |
330 |
%endif |
331 |
Provides: glibc-crypt_blowfish-devel = %{crypt_bf_ver} |
332 |
|
333 |
%description devel |
334 |
The glibc-devel package contains the header and object files necessary |
335 |
for developing programs which use the standard C libraries (which are |
336 |
used by nearly all programs). If you are developing programs which |
337 |
will use the standard C libraries, your system needs to have these |
338 |
standard header and object files available in order to create the |
339 |
executables. |
340 |
|
341 |
This package also includes the C header files for the Linux kernel. |
342 |
The header files define structures and constants that are needed for |
343 |
building most standard programs. The header files are also needed for |
344 |
rebuilding the kernel. |
345 |
|
346 |
Install glibc-devel if you are going to develop programs which will |
347 |
use the standard C libraries. |
348 |
|
349 |
%package static-devel |
350 |
Summary: Static libraries for GNU C library |
351 |
Group: Development/C |
352 |
Requires: %{name}-devel = %{glibcepoch}:%{glibcversion}-%{glibcrelease} |
353 |
|
354 |
%description static-devel |
355 |
The glibc-static-devel package contains the static libraries necessary |
356 |
for developing programs which use the standard C libraries. Install |
357 |
glibc-static-devel if you need to statically link your program or |
358 |
library. |
359 |
|
360 |
%package profile |
361 |
Summary: The GNU libc libraries, including support for gprof profiling |
362 |
Group: Development/C |
363 |
Obsoletes: libc-profile |
364 |
Provides: libc-profile = %{glibcversion}-%{glibcrelease} |
365 |
Autoreq: true |
366 |
|
367 |
%description profile |
368 |
The glibc-profile package includes the GNU libc libraries and support |
369 |
for profiling using the gprof program. Profiling is analyzing a |
370 |
program's functions to see how much CPU time they use and determining |
371 |
which functions are calling other functions during execution. To use |
372 |
gprof to profile a program, your program needs to use the GNU libc |
373 |
libraries included in glibc-profile (instead of the standard GNU libc |
374 |
libraries included in the glibc package). |
375 |
|
376 |
If you are going to use the gprof program to profile a program, you'll |
377 |
need to install the glibc-profile program. |
378 |
|
379 |
%package -n nscd |
380 |
Summary: A Name Service Caching Daemon (nscd) |
381 |
Group: System/Servers |
382 |
Requires(pre): rpm-helper |
383 |
Requires(preun): rpm-helper |
384 |
Requires(post): rpm-helper |
385 |
Requires(postun): rpm-helper |
386 |
Autoreq: true |
387 |
|
388 |
%description -n nscd |
389 |
Nscd caches name service lookups and can dramatically improve |
390 |
performance with NIS+, and may help with DNS as well. Note that you |
391 |
can't use nscd with 2.0 kernels because of bugs in the kernel-side |
392 |
thread support. Unfortunately, nscd happens to hit these bugs |
393 |
particularly hard. |
394 |
|
395 |
Install nscd if you need a name service lookup caching daemon, and |
396 |
you're not using a version 2.0 kernel. |
397 |
|
398 |
%if %{build_debug} |
399 |
%package debug |
400 |
Summary: Shared standard C libraries with debugging information |
401 |
Group: System/Libraries |
402 |
Requires: %{name} = %{glibcepoch}:%{glibcversion}-%{glibcrelease} |
403 |
Autoreq: false |
404 |
|
405 |
%description debug |
406 |
The glibc-debug package contains shared standard C libraries with |
407 |
debugging information. You need this only if you want to step into C |
408 |
library routines during debugging. |
409 |
|
410 |
To use these libraries, you need to add %{_libdir}/debug to your |
411 |
LD_LIBRARY_PATH variable prior to starting the debugger. |
412 |
%endif |
413 |
|
414 |
%package utils |
415 |
Summary: Development utilities from GNU C library |
416 |
Group: Development/Other |
417 |
Requires: %{name} = %{glibcepoch}:%{glibcversion}-%{glibcrelease} |
418 |
|
419 |
%description utils |
420 |
The glibc-utils package contains memusage, a memory usage profiler, |
421 |
mtrace, a memory leak tracer and xtrace, a function call tracer which |
422 |
can be helpful during program debugging. |
423 |
|
424 |
If unsure if you need this, don't install this package. |
425 |
|
426 |
%if %{build_i18ndata} |
427 |
%package i18ndata |
428 |
Summary: Database sources for 'locale' |
429 |
Group: System/Libraries |
430 |
|
431 |
%description i18ndata |
432 |
This package contains the data needed to build the locale data files |
433 |
to use the internationalization features of the GNU libc. |
434 |
%endif |
435 |
|
436 |
%if %{build_timezone} |
437 |
%package -n timezone |
438 |
Summary: Time zone descriptions |
439 |
Group: System/Base |
440 |
|
441 |
%description -n timezone |
442 |
These are configuration files that describe possible |
443 |
time zones. |
444 |
%endif |
445 |
|
446 |
%package doc |
447 |
Summary: GNU C library documentation |
448 |
Group: Development/Other |
449 |
|
450 |
%description doc |
451 |
The glibc-doc package contains documentation for the GNU C library in |
452 |
info format. |
453 |
|
454 |
%if %{build_pdf_doc} |
455 |
%package doc-pdf |
456 |
Summary: GNU C library documentation |
457 |
Group: Development/Other |
458 |
|
459 |
%description doc-pdf |
460 |
The glibc-doc-pdf package contains the printable documentation for the |
461 |
GNU C library in PDF format. |
462 |
%endif |
463 |
|
464 |
%prep |
465 |
%setup -q -n %{source_dir} -a 3 -a 2 -a 15 -a 16 |
466 |
|
467 |
%patch00 -p1 -b .localedef-archive-follow-symlinks |
468 |
%patch01 -p1 -b .fhs |
469 |
%patch02 -p1 -b .ldd-non-exec |
470 |
%patch03 -p1 -b .bz10851 |
471 |
%patch04 -p1 -b .nss-upgrade |
472 |
%patch05 -p1 -b .assign-global-scope-to-RFC-1918-addresses |
473 |
%patch06 -p1 -b .share-locale |
474 |
%patch07 -p1 -b .nsswitch.conf |
475 |
%patch08 -p1 -b .make-3.82-fix |
476 |
%patch09 -p1 -b .xterm-xvt |
477 |
%patch10 -p1 -b .translit-colon |
478 |
%patch11 -p1 -b .compat-EUR-currencies |
479 |
%patch12 -p1 -b .ppc-lddlibc4 |
480 |
%patch13 -p1 -b .nscd-enable |
481 |
%patch14 -p1 -b .nscd-no-host-cache |
482 |
%patch15 -p1 -b .ldconfig-chroot-aux-cache |
483 |
%patch16 -p1 -b .workaround-shortest-stem-in-make-3.82.patch |
484 |
%patch17 -p1 -b .i386-hwcapinfo |
485 |
%patch18 -p0 -R -b .provide_CFI_for_the_outermost_function |
486 |
%patch19 -p1 -b .nscd-init-should-start |
487 |
%patch20 -p1 -b .never-expand-ORIGIN-in-privileged-programs |
488 |
%patch22 -p1 -b .tcsetattr-kernel-bug-workaround |
489 |
%patch23 -p1 -b .timezone |
490 |
%patch24 -p1 -b .biarch-cpp-defines |
491 |
%patch26 -p1 -b .nice-fix |
492 |
%patch27 -p1 -b .ENOTTY-fr-translation |
493 |
%patch28 -p1 -b .gcc4-fortify |
494 |
%patch29 -p1 -b .biarch-utils |
495 |
%patch30 -p1 -b .multiarch-check |
496 |
%patch31 -p1 -b .i586-hptiming |
497 |
%patch32 -p1 -b .i586-if-no-cmov |
498 |
%patch33 -p1 -b .pt_BR-i18nfixes |
499 |
%patch34 -p1 -b .testsuite-ldbl-bits |
500 |
%patch35 -p1 -b .fix-error-handling-in-Linux-getlogin |
501 |
%patch36 -p1 -b .more-fixes-to-error-handling-in-getlogin_r |
502 |
%patch37 -p1 -b .__getlogin_r_loginuid-fail-if-tpwd-after-pwuid-is-NULL |
503 |
%patch38 -p1 -b .testsuite-rt-notparallel |
504 |
%patch44 -p1 -b .dont-tie-libcap-with-selinux |
505 |
%patch45 -p1 -b .CVE-2010-3856 |
506 |
|
507 |
# copy freesec source |
508 |
cp %{_sourcedir}/crypt_freesec.[ch] crypt/ |
509 |
echo "Applying crypt_blowfish patch:" |
510 |
%patch42 -p1 -b .mdv-avx-owl-crypt |
511 |
#patch -p1 -s < crypt_blowfish-%{crypt_bf_ver}/glibc-2.3.2-crypt.diff |
512 |
mv crypt/crypt.h crypt/gnu-crypt.h |
513 |
cp -a crypt_blowfish-%{crypt_bf_ver}/*.[chS] crypt/ |
514 |
|
515 |
## FreeSec support for extended/new-style/BSDI hashes in crypt(3) |
516 |
%patch39 -p1 -b .mdv-owl-crypt_freesec |
517 |
%patch40 -p1 -b .avx-relocate_fcrypt |
518 |
%patch41 -p1 -b .avx-increase_BF_FRAME |
519 |
# add sha256-crypt and sha512-crypt support to the Openwall wrapper |
520 |
%patch43 -p0 -b .mdv-wrapper_handle_sha |
521 |
|
522 |
%if %{build_selinux} |
523 |
# XXX kludge to build nscd with selinux support as it added -nostdinc |
524 |
# so /usr/include/selinux is not found |
525 |
ln -s %{_includedir}/selinux selinux |
526 |
%endif |
527 |
|
528 |
find . -type f -size 0 -o -name "*.orig" -exec rm -f {} \; |
529 |
|
530 |
# (Anssi 03/2008) FIXME: use _provides_exceptions |
531 |
cat > find_provides.sh << EOF |
532 |
#!/bin/sh |
533 |
%{rpmscripts}/find-provides | grep -v GLIBC_PRIVATE |
534 |
exit 0 |
535 |
EOF |
536 |
chmod +x find_provides.sh |
537 |
|
538 |
cat > find_requires.bootstrap.sh << EOF |
539 |
/bin/sh %{SOURCE4} %{buildroot} %{_target_cpu} | grep -v "\(GLIBC_PRIVATE\|linux-gate\|linux-vdso\)" |
540 |
exit 0 |
541 |
EOF |
542 |
chmod +x find_requires.bootstrap.sh |
543 |
|
544 |
# XXX: use better way later to avoid LD_LIBRARY_PATH issue |
545 |
cat %{rpmscripts}/find-requires | sed '/.*LD_LIBRARY_PATH.*/d;' > find_requires |
546 |
chmod +x find_requires |
547 |
# (Anssi 03/2008) FIXME: use _requires_exceptions |
548 |
cat > find_requires.noprivate.sh << EOF |
549 |
%{_builddir}/%{source_dir}/find_requires %{buildroot} %{_target_cpu} | \ |
550 |
grep -v GLIBC_PRIVATE |
551 |
exit 0 |
552 |
EOF |
553 |
chmod +x find_requires.noprivate.sh |
554 |
|
555 |
# FIXME: fix system rpm find-requires to use the prefix cross version |
556 |
%if %{build_bootstrap} || "%{_target_cpu}" != "%{target_cpu}" |
557 |
ln -s find_requires.bootstrap.sh find_requires.sh |
558 |
%else |
559 |
ln -s find_requires.noprivate.sh find_requires.sh |
560 |
%endif |
561 |
|
562 |
# Remove patch backups from files we ship in glibc packages |
563 |
rm -f ChangeLog.[^0-9]* |
564 |
rm -f localedata/locales/{???_??,??_??}.* |
565 |
rm -f localedata/locales/[a-z_]*.* |
566 |
|
567 |
%build |
568 |
# Prepare test matrix in the next function |
569 |
CheckList=$PWD/Check.list |
570 |
rm -f $CheckList |
571 |
touch $CheckList |
572 |
|
573 |
# |
574 |
# CompareKver <kernel version> |
575 |
# function to compare the desired kernel version with running kernel |
576 |
# version (package releases not taken into account in comparison). The |
577 |
# function returns: |
578 |
# -1 = <kernel version> is lesser than current running kernel |
579 |
# 0 = <kernel version> is equal to the current running kernel |
580 |
# 1 = <kernel version> is greater than current running kernel |
581 |
# |
582 |
function CompareKver() { |
583 |
v1=`echo $1 | sed 's/\.\?$/./'` |
584 |
v2=`uname -r | sed 's/[^.0-9].*//' | sed 's/\.\?$/./'` |
585 |
n=1 |
586 |
s=0 |
587 |
while true; do |
588 |
c1=`echo "$v1" | cut -d "." -f $n` |
589 |
c2=`echo "$v2" | cut -d "." -f $n` |
590 |
if [ -z "$c1" -a -z "$c2" ]; then |
591 |
break |
592 |
elif [ -z "$c1" ]; then |
593 |
s=-1 |
594 |
break |
595 |
elif [ -z "$c2" ]; then |
596 |
s=1 |
597 |
break |
598 |
elif [ "$c1" -gt "$c2" ]; then |
599 |
s=1 |
600 |
break |
601 |
elif [ "$c2" -gt "$c1" ]; then |
602 |
s=-1 |
603 |
break |
604 |
fi |
605 |
n=$((n + 1)) |
606 |
done |
607 |
echo $s |
608 |
} |
609 |
|
610 |
# |
611 |
# BuildGlibc <arch> [<extra_configure_options>+] |
612 |
# |
613 |
function BuildGlibc() { |
614 |
arch="$1" |
615 |
shift 1 |
616 |
|
617 |
# PowerPC CPU add-on |
618 |
case $arch in |
619 |
cpu-addon,*) |
620 |
cpu=` echo "$arch" | sed -n "/.*,\([^,]*\),.*$/s//\1/p"` |
621 |
arch=`echo "$arch" | sed -n "/.*,.*,\([^,]*\)$/s//\1/p"` |
622 |
;; |
623 |
*) |
624 |
cpu=$arch |
625 |
;; |
626 |
esac |
627 |
|
628 |
# Select optimization flags and compiler to use |
629 |
BuildAltArch="no" |
630 |
BuildCompFlags="" |
631 |
BuildFlags="" |
632 |
case $arch in |
633 |
i[3456]86 | athlon) |
634 |
BuildFlags="-march=$arch -mtune=generic" |
635 |
if [[ "`uname -m`" = "x86_64" ]]; then |
636 |
BuildAltArch="yes" |
637 |
BuildCompFlags="-m32" |
638 |
fi |
639 |
;; |
640 |
x86_64) |
641 |
BuildFlags="-mtune=generic" |
642 |
;; |
643 |
ppc) |
644 |
if [[ "`uname -m`" = "ppc64" ]]; then |
645 |
BuildAltArch="yes" |
646 |
BuildCompFlags="-m32" |
647 |
# 64-bit processors we support do support power4+ ISA (2.01) |
648 |
if [[ "$cpu" != "$arch" ]]; then |
649 |
BuildFlags="-mcpu=$cpu" |
650 |
else |
651 |
BuildFlags="-mcpu=power4 -mtune=cell" |
652 |
fi |
653 |
fi |
654 |
;; |
655 |
ppc64) |
656 |
if [[ "$cpu" != "$arch" ]]; then |
657 |
BuildFlags="-mcpu=$cpu" |
658 |
else |
659 |
BuildFlags="-mcpu=power4 -mtune=cell" |
660 |
fi |
661 |
;; |
662 |
alphaev6) |
663 |
BuildFlags="-mcpu=ev6" |
664 |
;; |
665 |
sparc) |
666 |
BuildFlags="-fcall-used-g6" |
667 |
BuildCompFlags="-m32" |
668 |
;; |
669 |
sparcv9) |
670 |
BuildFlags="-mcpu=ultrasparc -fcall-used-g6" |
671 |
BuildCompFlags="-m32" |
672 |
;; |
673 |
sparc64) |
674 |
BuildFlags="-mcpu=ultrasparc -mvis -fcall-used-g6" |
675 |
BuildCompFlags="-m64 -mcpu=ultrasparc" |
676 |
;; |
677 |
esac |
678 |
|
679 |
# Choose multiarch support |
680 |
MultiArchFlags= |
681 |
case $arch in |
682 |
i686 | x86_64) |
683 |
MultiArchFlags="--enable-multi-arch" |
684 |
;; |
685 |
esac |
686 |
|
687 |
# Determine C & C++ compilers |
688 |
BuildCC="%{__cc} $BuildCompFlags" |
689 |
BuildCXX="%{__cxx} $BuildCompFlags" |
690 |
|
691 |
# Are we supposed to cross-compile? |
692 |
if [[ "%{target_cpu}" != "%{_target_cpu}" ]]; then |
693 |
BuildCC="%{target_cpu}-linux-$BuildCC" |
694 |
BuildCXX="%{target_cpu}-linux-$BuildCXX" |
695 |
BuildCross="--build=%{_target_platform}" |
696 |
export libc_cv_forced_unwind=yes libc_cv_c_cleanup=yes |
697 |
fi |
698 |
|
699 |
BuildFlags="$BuildFlags -DNDEBUG=1 -O2 -finline-functions -g" |
700 |
if $BuildCC -v 2>&1 | grep -q 'gcc version 3.0'; then |
701 |
# gcc3.0 had really poor inlining heuristics causing problems in |
702 |
# resulting ld.so |
703 |
BuildFlags="$BuildFlags -finline-limit=2000" |
704 |
fi |
705 |
|
706 |
# Do not use direct references against %gs when accessing tls data |
707 |
# XXX make it the default in GCC? (for other non glibc specific usage) |
708 |
case $arch in |
709 |
i[3456]86 | x86_64) |
710 |
BuildFlags="$BuildFlags -mno-tls-direct-seg-refs" |
711 |
;; |
712 |
esac |
713 |
|
714 |
# Arch specific compilation flags |
715 |
if [[ "$arch" = "ppc64" ]]; then |
716 |
BuildFlags="$BuildFlags -fno-inline-functions -mno-minimal-toc" |
717 |
fi |
718 |
|
719 |
# Extra configure flags |
720 |
ExtraFlags= |
721 |
if [[ "%{build_profile}" != "0" ]]; then |
722 |
ExtraFlags="$ExtraFlags --enable-profile" |
723 |
fi |
724 |
|
725 |
# NPTL+TLS are now the default |
726 |
Pthreads="nptl" |
727 |
TlsFlags="--with-tls --with-__thread" |
728 |
|
729 |
# Add-ons |
730 |
AddOns="$Pthreads,libidn" |
731 |
if [[ "$cpu" != "$arch" ]]; then |
732 |
AddOns="$AddOns,powerpc-cpu" |
733 |
BuildFlags="$BuildFlags -mcpu=$cpu" |
734 |
ExtraFlags="$ExtraFlags --with-cpu=$cpu" |
735 |
fi |
736 |
|
737 |
# Build with selinux support? |
738 |
%if %{build_selinux} |
739 |
SElinuxFlags="--with-selinux" |
740 |
%else |
741 |
SElinuxFlags="--without-selinux" |
742 |
%endif |
743 |
|
744 |
# Kernel headers directory |
745 |
KernelHeaders=%{_includedir} |
746 |
|
747 |
# Determine library name |
748 |
glibc_cv_cc_64bit_output=no |
749 |
if echo ".text" | $BuildCC -c -o test.o -xassembler -; then |
750 |
case `/usr/bin/file test.o` in |
751 |
*"ELF 64"*) |
752 |
glibc_cv_cc_64bit_output=yes |
753 |
;; |
754 |
esac |
755 |
fi |
756 |
rm -f test.o |
757 |
|
758 |
# Force a separate and clean object dir |
759 |
rm -rf build-$cpu-linux |
760 |
mkdir build-$cpu-linux |
761 |
pushd build-$cpu-linux |
762 |
[[ "$BuildAltArch" = "yes" ]] && touch ".alt" || touch ".main" |
763 |
CC="$BuildCC" CXX="$BuildCXX" CFLAGS="$BuildFlags" ../configure \ |
764 |
$arch-mageia-linux-gnu $BuildCross \ |
765 |
--prefix=%{_prefix} \ |
766 |
--libexecdir=%{_prefix}/libexec \ |
767 |
--infodir=%{_infodir} \ |
768 |
--enable-add-ons=$AddOns --without-cvs \ |
769 |
$TlsFlags $ExtraFlags $MultiArchFlags $SElinuxFlags \ |
770 |
--enable-experimental-malloc \ |
771 |
--enable-kernel=%{enablekernel} \ |
772 |
--with-headers=$KernelHeaders ${1+"$@"} |
773 |
%make -r |
774 |
popd |
775 |
|
776 |
# All tests are expected to pass on certain platforms, depending also |
777 |
# on the version of the kernel running |
778 |
case $arch in |
779 |
athlon | ia64 | ppc | ppc64) |
780 |
if [ "`CompareKver %{check_min_kver}`" -lt 0 ]; then |
781 |
check_flags="" |
782 |
else |
783 |
check_flags="-k" |
784 |
fi |
785 |
;; |
786 |
*) |
787 |
check_flags="-k" |
788 |
;; |
789 |
esac |
790 |
|
791 |
# Generate test matrix |
792 |
[[ -d "build-$arch-linux" ]] || { |
793 |
echo "ERROR: PrepareGlibcTest: build-$arch-linux does not exist!" |
794 |
return 1 |
795 |
} |
796 |
local BuildJobs="-j`getconf _NPROCESSORS_ONLN`" |
797 |
echo "$BuildJobs -d build-$arch-linux $check_flags" >> $CheckList |
798 |
|
799 |
case $cpu in |
800 |
i686|athlon) base_arch=i586;; |
801 |
power*) base_arch=$arch;; |
802 |
*) base_arch=none;; |
803 |
esac |
804 |
|
805 |
[[ -d "build-$base_arch-linux" ]] && { |
806 |
check_flags="$check_flags -l build-$base_arch-linux/elf/ld.so" |
807 |
echo "$BuildJobs -d build-$arch-linux $check_flags" >> $CheckList |
808 |
} |
809 |
return 0 |
810 |
} |
811 |
|
812 |
# Build main glibc |
813 |
BuildGlibc %{target_cpu} |
814 |
|
815 |
%if %{build_biarch} |
816 |
%if %isarch sparc64 |
817 |
BuildGlibc sparcv9 |
818 |
%endif |
819 |
%if %isarch x86_64 |
820 |
BuildGlibc i686 |
821 |
%endif |
822 |
%if %isarch ppc64 |
823 |
BuildGlibc ppc |
824 |
%endif |
825 |
%endif |
826 |
|
827 |
%if %isarch ppc ppc64 |
828 |
for cpu in %{powerpc_cpu_list}; do |
829 |
[[ "$cpu" = "noarch" ]] && continue |
830 |
BuildGlibc cpu-addon,$cpu,%{_arch} --disable-profile |
831 |
done |
832 |
%endif |
833 |
|
834 |
# Build i686 libraries if not already building for i686/athlon |
835 |
case %{target_cpu} in |
836 |
i686 | athlon) |
837 |
;; |
838 |
i[3-6]86) |
839 |
BuildGlibc i686 --disable-profile |
840 |
;; |
841 |
esac |
842 |
|
843 |
make -C crypt_blowfish-%{crypt_bf_ver} man |
844 |
|
845 |
%if %{build_check} |
846 |
export TMPDIR=/tmp |
847 |
export TIMEOUTFACTOR=16 |
848 |
Check="$PWD/glibc-check.sh" |
849 |
cat %{SOURCE5} > $Check |
850 |
chmod +x $Check |
851 |
while read arglist; do |
852 |
$Check $arglist || exit 1 |
853 |
done < $CheckList |
854 |
%endif |
855 |
|
856 |
%install |
857 |
rm -rf $RPM_BUILD_ROOT |
858 |
|
859 |
# force use of _NPROCESSORS_ONLN jobs since RPM_BUILD_NCPUS could be |
860 |
# greater for icecream |
861 |
BuildJobs="-j`getconf _NPROCESSORS_ONLN`" |
862 |
|
863 |
make install_root=$RPM_BUILD_ROOT install -C build-%{target_cpu}-linux |
864 |
%if %{build_i18ndata} |
865 |
(cd build-%{target_cpu}-linux; |
866 |
make $BuildJobs -C ../localedata objdir=`pwd` \ |
867 |
install_root=$RPM_BUILD_ROOT \ |
868 |
install-locales |
869 |
) |
870 |
install -m 0644 localedata/SUPPORTED $RPM_BUILD_ROOT/%{_datadir}/i18n/ |
871 |
%endif |
872 |
sh manpages/Script.sh |
873 |
|
874 |
# Empty filelist for non i686/athlon targets |
875 |
> extralibs.filelist |
876 |
|
877 |
# Install biarch libraries |
878 |
%if %{build_biarch} |
879 |
%if %isarch sparc64 |
880 |
ALT_ARCH=sparcv9-linux |
881 |
%endif |
882 |
%if %isarch x86_64 |
883 |
ALT_ARCH=i686-linux |
884 |
%endif |
885 |
%if %isarch ppc64 |
886 |
ALT_ARCH=ppc-linux |
887 |
%endif |
888 |
mkdir -p $RPM_BUILD_ROOT/$ALT_ARCH |
889 |
make install_root=$RPM_BUILD_ROOT/$ALT_ARCH install -C build-$ALT_ARCH |
890 |
|
891 |
# Dispatch */lib only |
892 |
mv $RPM_BUILD_ROOT/$ALT_ARCH/lib $RPM_BUILD_ROOT/ |
893 |
mv $RPM_BUILD_ROOT/$ALT_ARCH%{_prefix}/libexec/getconf/* \ |
894 |
$RPM_BUILD_ROOT%{_prefix}/libexec/getconf/ |
895 |
mkdir $RPM_BUILD_ROOT%{_prefix}/lib |
896 |
mv $RPM_BUILD_ROOT/$ALT_ARCH%{_prefix}/lib/* $RPM_BUILD_ROOT%{_prefix}/lib/ |
897 |
# We want 32-bit binaries on sparc64 |
898 |
%if %isarch sparc64 |
899 |
mv -f $RPM_BUILD_ROOT/$ALT_ARCH/sbin/* $RPM_BUILD_ROOT/sbin |
900 |
mv -f $RPM_BUILD_ROOT/$ALT_ARCH/%{_bindir}/* $RPM_BUILD_ROOT%{_bindir} |
901 |
mv -f $RPM_BUILD_ROOT/$ALT_ARCH/%{_sbindir}/* $RPM_BUILD_ROOT%{_sbindir} |
902 |
%endif |
903 |
rm -rf $RPM_BUILD_ROOT/$ALT_ARCH |
904 |
# XXX Dispatch 32-bit stubs |
905 |
(sed '/^@/d' include/stubs-prologue.h; LC_ALL=C sort $(find build-$ALT_ARCH -name stubs)) \ |
906 |
> $RPM_BUILD_ROOT%{_includedir}/gnu/stubs-32.h |
907 |
%endif |
908 |
|
909 |
# Install extra glibc libraries |
910 |
function InstallGlibc() { |
911 |
local BuildDir="$1" |
912 |
local SubDir="$2" |
913 |
local LibDir="$3" |
914 |
|
915 |
case $BuildDir in |
916 |
*) Pthreads=nptl ;; |
917 |
esac |
918 |
|
919 |
[[ -z "$LibDir" ]] && LibDir="%{_slibdir}" |
920 |
|
921 |
pushd $BuildDir |
922 |
mkdir -p $RPM_BUILD_ROOT$LibDir/$SubDir/ |
923 |
install -m755 libc.so $RPM_BUILD_ROOT$LibDir/$SubDir/`basename $RPM_BUILD_ROOT$LibDir/libc-*.so` |
924 |
ln -sf `basename $RPM_BUILD_ROOT$LibDir/libc-*.so` $RPM_BUILD_ROOT$LibDir/$SubDir/`basename $RPM_BUILD_ROOT$LibDir/libc.so.*` |
925 |
install -m755 math/libm.so $RPM_BUILD_ROOT$LibDir/$SubDir/`basename $RPM_BUILD_ROOT$LibDir/libm-*.so` |
926 |
ln -sf `basename $RPM_BUILD_ROOT$LibDir/libm-*.so` $RPM_BUILD_ROOT$LibDir/$SubDir/`basename $RPM_BUILD_ROOT$LibDir/libm.so.*` |
927 |
install -m755 $Pthreads/libpthread.so $RPM_BUILD_ROOT$LibDir/$SubDir/`basename $RPM_BUILD_ROOT$LibDir/libpthread-*.so` |
928 |
ln -sf `basename $RPM_BUILD_ROOT$LibDir/libpthread-*.so` $RPM_BUILD_ROOT$LibDir/$SubDir/`basename $RPM_BUILD_ROOT$LibDir/libpthread.so.*` |
929 |
install -m755 ${Pthreads}_db/libthread_db.so $RPM_BUILD_ROOT$LibDir/$SubDir/`basename $RPM_BUILD_ROOT$LibDir/libthread_db-*.so` |
930 |
ln -sf `basename $RPM_BUILD_ROOT$LibDir/libthread_db-*.so` $RPM_BUILD_ROOT$LibDir/$SubDir/`basename $RPM_BUILD_ROOT$LibDir/libthread_db.so.*` |
931 |
install -m755 rt/librt.so $RPM_BUILD_ROOT$LibDir/$SubDir/`basename $RPM_BUILD_ROOT$LibDir/librt-*.so` |
932 |
ln -sf `basename $RPM_BUILD_ROOT$LibDir/librt-*.so` $RPM_BUILD_ROOT$LibDir/$SubDir/`basename $RPM_BUILD_ROOT$LibDir/librt.so.*` |
933 |
echo "%dir $LibDir/$SubDir" >> ../extralibs.filelist |
934 |
find $RPM_BUILD_ROOT$LibDir/$SubDir -maxdepth 1 -type f -o -type l | sed -e "s|$RPM_BUILD_ROOT||" >> ../extralibs.filelist |
935 |
popd |
936 |
} |
937 |
|
938 |
# Install arch-specific optimized libraries |
939 |
%if %isarch %{ix86} |
940 |
case %{target_cpu} in |
941 |
i[3-5]86) |
942 |
InstallGlibc build-i686-linux i686 |
943 |
;; |
944 |
esac |
945 |
%endif |
946 |
%if %isarch ppc ppc64 |
947 |
for cpu in %{powerpc_cpu_list}; do |
948 |
[[ "$cpu" = "noarch" ]] && continue |
949 |
InstallGlibc build-$cpu-linux $cpu |
950 |
done |
951 |
# Use hardlinks, not symlinks |
952 |
# see upper NOTE if you really want dedicated power5+ hwcap... |
953 |
[[ -d "$RPM_BUILD_ROOT/%{_lib}/power5" ]] && { |
954 |
mkdir -p $RPM_BUILD_ROOT/%{_lib}/power5+ |
955 |
ln -v $RPM_BUILD_ROOT/%{_lib}/power5/*.so \ |
956 |
$RPM_BUILD_ROOT/%{_lib}/power5+/ |
957 |
$RPM_BUILD_ROOT/sbin/ldconfig -n $RPM_BUILD_ROOT/%{_lib}/power5+/ |
958 |
echo "%dir /%{_lib}/power5+" >> extralibs.filelist |
959 |
find $RPM_BUILD_ROOT$LibDir/%{_lib}/power5+/ -maxdepth 1 -type f -o -type l | sed -e "s|$RPM_BUILD_ROOT||" >> extralibs.filelist |
960 |
} |
961 |
%endif |
962 |
|
963 |
# NPTL <bits/stdio-lock.h> is not usable outside of glibc, so include |
964 |
# the generic one (RH#162634) |
965 |
install -m644 bits/stdio-lock.h $RPM_BUILD_ROOT%{_includedir}/bits/stdio-lock.h |
966 |
|
967 |
# Compatibility hack: this locale has vanished from glibc, but some other |
968 |
# programs are still using it. Normally we would handle it in the %pre |
969 |
# section but with glibc that is simply not an option |
970 |
mkdir -p $RPM_BUILD_ROOT%{_datadir}/locale/ru_RU/LC_MESSAGES |
971 |
|
972 |
# Remove the files we don't want to distribute |
973 |
rm -f $RPM_BUILD_ROOT%{_libdir}/libNoVersion* |
974 |
rm -f $RPM_BUILD_ROOT%{_slibdir}/libNoVersion* |
975 |
|
976 |
ln -sf libbsd-compat.a $RPM_BUILD_ROOT%{_libdir}/libbsd.a |
977 |
%if %{build_biarch} |
978 |
ln -sf libbsd-compat.a $RPM_BUILD_ROOT%{_prefix}/lib/libbsd.a |
979 |
%endif |
980 |
|
981 |
%if "%{name}" == "glibc" |
982 |
install -m 644 mageia/nsswitch.conf $RPM_BUILD_ROOT%{_sysconfdir}/nsswitch.conf |
983 |
%endif |
984 |
|
985 |
# This is for ncsd - in glibc 2.2 |
986 |
%if %{build_nscd} |
987 |
install -m 644 nscd/nscd.conf $RPM_BUILD_ROOT%{_sysconfdir} |
988 |
mkdir -p $RPM_BUILD_ROOT%{_initrddir} |
989 |
install -m 755 nscd/nscd.init $RPM_BUILD_ROOT%{_initrddir}/nscd |
990 |
%endif |
991 |
|
992 |
# These man pages require special attention |
993 |
mkdir -p %{buildroot}%{_mandir}/man3 |
994 |
install -p -m 0644 crypt_blowfish-%{crypt_bf_ver}/*.3 %{buildroot}%{_mandir}/man3/ |
995 |
|
996 |
# Useless and takes place |
997 |
rm -rf %buildroot/%{_datadir}/zoneinfo/{posix,right} |
998 |
|
999 |
# Include ld.so.conf |
1000 |
%if "%{name}" == "glibc" |
1001 |
echo "include /etc/ld.so.conf.d/*.conf" > $RPM_BUILD_ROOT%{_sysconfdir}/ld.so.conf |
1002 |
chmod 644 $RPM_BUILD_ROOT%{_sysconfdir}/ld.so.conf |
1003 |
mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/ld.so.conf.d |
1004 |
%endif |
1005 |
|
1006 |
# ldconfig cache |
1007 |
mkdir -p $RPM_BUILD_ROOT%{_var}/cache/ldconfig |
1008 |
touch $RPM_BUILD_ROOT%{_var}/cache/ldconfig/aux-cache |
1009 |
|
1010 |
# automatic ldconfig cache update on rpm installs/removals |
1011 |
# (see http://wiki.mandriva.com/en/Rpm_filetriggers) |
1012 |
install -d %buildroot%{_var}/lib/rpm/filetriggers |
1013 |
cat > %buildroot%{_var}/lib/rpm/filetriggers/ldconfig.filter << EOF |
1014 |
^.((/lib|/usr/lib)(64)?/[^/]*\.so\.|/etc/ld.so.conf.d/[^/]*\.conf) |
1015 |
EOF |
1016 |
cat > %buildroot%{_var}/lib/rpm/filetriggers/ldconfig.script << EOF |
1017 |
#!/bin/sh |
1018 |
ldconfig -X |
1019 |
EOF |
1020 |
chmod 755 %buildroot%{_var}/lib/rpm/filetriggers/ldconfig.script |
1021 |
|
1022 |
# Include %{_libdir}/gconv/gconv-modules.cache |
1023 |
> $RPM_BUILD_ROOT%{_libdir}/gconv/gconv-modules.cache |
1024 |
chmod 644 $RPM_BUILD_ROOT%{_libdir}/gconv/gconv-modules.cache |
1025 |
|
1026 |
touch $RPM_BUILD_ROOT%{_sysconfdir}/ld.so.cache |
1027 |
|
1028 |
# Add libraries to debug sub-package |
1029 |
%if %{build_debug} |
1030 |
mkdir $RPM_BUILD_ROOT%{_libdir}/debug |
1031 |
#cp -a $RPM_BUILD_ROOT%{_libdir}/*.a $RPM_BUILD_ROOT%{_libdir}/debug/ |
1032 |
#rm -f $RPM_BUILD_ROOT%{_libdir}/debug/*_p.a |
1033 |
cp -a $RPM_BUILD_ROOT%{_slibdir}/lib*.so* $RPM_BUILD_ROOT%{_libdir}/debug/ |
1034 |
|
1035 |
pushd $RPM_BUILD_ROOT%{_libdir}/debug |
1036 |
for lib in *.so*; do |
1037 |
[[ -f "$lib" ]] && DEBUG_LIBS="$DEBUG_LIBS %{_libdir}/debug/$lib" |
1038 |
done |
1039 |
popd |
1040 |
%endif |
1041 |
|
1042 |
# Are we cross-compiling? |
1043 |
Strip="strip" |
1044 |
if [[ "%{_target_cpu}" != "%{target_cpu}" ]]; then |
1045 |
Strip="%{target_cpu}-linux-$Strip" |
1046 |
fi |
1047 |
|
1048 |
# Strip libpthread but keep some symbols |
1049 |
find $RPM_BUILD_ROOT%{_slibdir} -type f -name "libpthread-*.so" \ |
1050 |
-o -type f -name "libc-*.so" | \ |
1051 |
xargs $Strip -g -R .comment |
1052 |
|
1053 |
%if %{build_biarch} |
1054 |
find $RPM_BUILD_ROOT/lib -type f -name "libpthread-*.so" \ |
1055 |
-o -type f -name "libc-*.so" | \ |
1056 |
xargs $Strip -g -R .comment |
1057 |
%endif |
1058 |
|
1059 |
# Strip debugging info from all static libraries |
1060 |
pushd $RPM_BUILD_ROOT%{_libdir} |
1061 |
for i in *.a; do |
1062 |
if [ -f "$i" ]; then |
1063 |
case "$i" in |
1064 |
*_p.a) ;; |
1065 |
*) $Strip -g -R .comment $i ;; |
1066 |
esac |
1067 |
fi |
1068 |
done |
1069 |
popd |
1070 |
|
1071 |
# post install wrapper |
1072 |
%__cc -Os -DSLIBDIR="\"%{_slibdir}\"" -DASH_BIN="\"%{ash_bin}\"" %{SOURCE14} -static \ |
1073 |
-L $RPM_BUILD_ROOT%{_libdir}/ \ |
1074 |
-o $RPM_BUILD_ROOT%{_sbindir}/glibc-post-wrapper |
1075 |
chmod 700 $RPM_BUILD_ROOT%{_sbindir}/glibc-post-wrapper |
1076 |
|
1077 |
# rquota.x and rquota.h are now provided by quota |
1078 |
rm -f $RPM_BUILD_ROOT%{_includedir}/rpcsvc/rquota.[hx] |
1079 |
|
1080 |
# Hardlink identical locale files together |
1081 |
%if %{build_i18ndata} |
1082 |
gcc -O2 -o build-%{_target_cpu}-linux/hardlink redhat/hardlink.c |
1083 |
build-%{_target_cpu}-linux/hardlink -vc $RPM_BUILD_ROOT%{_datadir}/locale |
1084 |
%endif |
1085 |
|
1086 |
rm -rf $RPM_BUILD_ROOT%{_includedir}/netatalk/ |
1087 |
|
1088 |
# Build file list for devel package |
1089 |
find $RPM_BUILD_ROOT%{_includedir} -type f -or -type l > devel.filelist |
1090 |
find $RPM_BUILD_ROOT%{_includedir} -type d | sed "s/^/%dir /" | \ |
1091 |
grep -v "%{_libdir}/libnss1.*.so$" | \ |
1092 |
grep -v "%{_includedir}$" | >> devel.filelist |
1093 |
find $RPM_BUILD_ROOT%{_libdir} -maxdepth 1 -name "*.so" -o -name "*.o" | egrep -v "(libmemusage.so|libpcprofile.so)" >> devel.filelist |
1094 |
# biarch libs |
1095 |
%if %{build_biarch} |
1096 |
find $RPM_BUILD_ROOT%{_prefix}/lib -maxdepth 1 -name "*.so" -o -name "*.o" | egrep -v "(libmemusage.so|libpcprofile.so)" >> devel.filelist |
1097 |
%endif |
1098 |
perl -pi -e "s|$RPM_BUILD_ROOT||" devel.filelist |
1099 |
|
1100 |
# /etc/localtime - we're proud of our timezone #Well we may put Paris |
1101 |
%if %{build_timezone} |
1102 |
rm -f $RPM_BUILD_ROOT%{_sysconfdir}/localtime |
1103 |
cp -f $RPM_BUILD_ROOT%{_datadir}/zoneinfo/US/Eastern $RPM_BUILD_ROOT%{_sysconfdir}/localtime |
1104 |
#ln -sf ..%{_datadir}/zoneinfo/US/Eastern $RPM_BUILD_ROOT%{_sysconfdir}/localtime |
1105 |
%endif |
1106 |
|
1107 |
# [gg] build PDF documentation |
1108 |
%if %{build_pdf_doc} |
1109 |
(cd manual; texi2dvi -p -t @afourpaper -t @finalout libc.texinfo) |
1110 |
%endif |
1111 |
|
1112 |
# the last bit: more documentation |
1113 |
rm -rf documentation |
1114 |
mkdir documentation |
1115 |
cp timezone/README documentation/README.timezone |
1116 |
cp ChangeLog* documentation |
1117 |
gzip -9 documentation/ChangeLog* |
1118 |
mkdir documentation/crypt_blowfish-%{crypt_bf_ver} |
1119 |
install -m 644 crypt_blowfish-%{crypt_bf_ver}/{README,LINKS,PERFORMANCE} \ |
1120 |
documentation/crypt_blowfish-%{crypt_bf_ver} |
1121 |
|
1122 |
# Generate final rpm filelist, with localized libc.mo files |
1123 |
rm -f rpm.filelist |
1124 |
%if "%{name}" == "glibc" |
1125 |
%find_lang libc |
1126 |
perl -ne '/^\s*$/ or print' libc.lang > rpm.filelist |
1127 |
%endif |
1128 |
cat extralibs.filelist >> rpm.filelist |
1129 |
|
1130 |
# Remove unpackaged files |
1131 |
rm -f $RPM_BUILD_ROOT%{_infodir}/dir.old* |
1132 |
rm -rf $RPM_BUILD_ROOT%{_includedir}/asm-*/mach-*/ |
1133 |
rm -f $RPM_BUILD_ROOT%{_datadir}/locale/locale-archive* |
1134 |
|
1135 |
%if !%{build_utils} |
1136 |
%if %{build_biarch} |
1137 |
rm -f $RPM_BUILD_ROOT%{_slibdir32}/libmemusage.so |
1138 |
rm -f $RPM_BUILD_ROOT%{_slibdir32}/libpcprofile.so |
1139 |
%endif |
1140 |
rm -f $RPM_BUILD_ROOT%{_slibdir}/libmemusage.so |
1141 |
rm -f $RPM_BUILD_ROOT%{_slibdir}/libpcprofile.so |
1142 |
rm -f $RPM_BUILD_ROOT%{_bindir}/memusage |
1143 |
rm -f $RPM_BUILD_ROOT%{_bindir}/memusagestat |
1144 |
rm -f $RPM_BUILD_ROOT%{_bindir}/mtrace |
1145 |
rm -f $RPM_BUILD_ROOT%{_bindir}/pcprofiledump |
1146 |
rm -f $RPM_BUILD_ROOT%{_bindir}/xtrace |
1147 |
%endif |
1148 |
|
1149 |
%if !%{build_timezone} |
1150 |
rm -f $RPM_BUILD_ROOT%{_sysconfdir}/localtime |
1151 |
rm -f $RPM_BUILD_ROOT%{_sbindir}/zdump |
1152 |
rm -f $RPM_BUILD_ROOT%{_sbindir}/zic |
1153 |
rm -f $RPM_BUILD_ROOT%{_mandir}/man1/zdump.1* |
1154 |
rm -rf $RPM_BUILD_ROOT%{_datadir}/zoneinfo |
1155 |
%endif |
1156 |
|
1157 |
%if !%{build_i18ndata} |
1158 |
rm -rf $RPM_BUILD_ROOT%{_datadir}/i18n |
1159 |
%endif |
1160 |
|
1161 |
%if "%{name}" != "glibc" |
1162 |
rm -rf $RPM_BUILD_ROOT/boot |
1163 |
rm -rf $RPM_BUILD_ROOT/sbin |
1164 |
rm -rf $RPM_BUILD_ROOT/usr/share |
1165 |
rm -rf $RPM_BUILD_ROOT%{_bindir} |
1166 |
rm -rf $RPM_BUILD_ROOT%{_sbindir} |
1167 |
rm -rf $RPM_BUILD_ROOT%{_datadir} |
1168 |
rm -rf $RPM_BUILD_ROOT%{_mandir} |
1169 |
rm -rf $RPM_BUILD_ROOT%{_infodir} |
1170 |
rm -rf $RPM_BUILD_ROOT%{_prefix}/etc |
1171 |
rm -rf $RPM_BUILD_ROOT%{_libdir}/gconv |
1172 |
%endif |
1173 |
|
1174 |
# In case we are cross-compiling, don't bother to remake symlinks and |
1175 |
# fool spec-helper when stripping files |
1176 |
%if "%{name}" != "glibc" |
1177 |
export DONT_SYMLINK_LIBS=1 |
1178 |
export PATH=%{_bindir}:$PATH |
1179 |
%endif |
1180 |
|
1181 |
EXCLUDE_FROM_STRIP="ld-%{glibcversion}.so libpthread libc-%{glibcversion}.so $DEBUG_LIBS" |
1182 |
export EXCLUDE_FROM_STRIP |
1183 |
|
1184 |
%if "%{name}" == "glibc" |
1185 |
%define upgradestamp %{_slibdir}/glibc.upgraded |
1186 |
%define broken_link %{_slibdir}/libnss_nis.so.1 %{_slibdir}/libnss_files.so.1 %{_slibdir}/libnss_dns.so.1 %{_slibdir}/libnss_compat.so.1 |
1187 |
|
1188 |
%pre -p %{ash_bin} |
1189 |
# test(1) and echo(1) are built-ins |
1190 |
if [ -d %{_slibdir} ] && [ ! -f %{_slibdir}/libnss_files-%{glibcversion}.so ]; then |
1191 |
echo > %{upgradestamp} |
1192 |
fi |
1193 |
|
1194 |
%post -p %{_sbindir}/glibc-post-wrapper |
1195 |
export LC_ALL=C |
1196 |
|
1197 |
if [ "$1" -gt 1 ]; then |
1198 |
# migrate /etc/ld.so.conf to include the new /etc/ld.so.conf.d/ |
1199 |
# without external commands but for removing the temporary file |
1200 |
ldso_conf=/etc/ld.so.conf |
1201 |
while read i; do |
1202 |
[ "$i" = "include /etc/ld.so.conf.d/*.conf" ] && keep=1 |
1203 |
# Remove previously used include line without absolute path |
1204 |
[ "$i" = "include ld.so.conf.d/*.conf" ] || echo $i |
1205 |
done < $ldso_conf > $ldso_conf- |
1206 |
if [ -z "$keep" ]; then |
1207 |
echo "include /etc/ld.so.conf.d/*.conf" > $ldso_conf |
1208 |
while read i; do |
1209 |
echo $i |
1210 |
done < $ldso_conf- >> $ldso_conf |
1211 |
fi |
1212 |
[ -x /bin/rm ] && /bin/rm -f $ldso_conf- |
1213 |
fi |
1214 |
/sbin/ldconfig |
1215 |
|
1216 |
if [ "$1" -gt 1 ]; then |
1217 |
# On upgrade the services doesn't work because libnss couldn't be |
1218 |
# loaded anymore. |
1219 |
if [ -f %{upgradestamp} ]; then |
1220 |
if /usr/bin/readlink /proc/1/exe >/dev/null && \ |
1221 |
/usr/bin/readlink /proc/1/root >/dev/null; then |
1222 |
if [ -x /sbin/telinit -a -p /dev/initctl ]; then |
1223 |
/sbin/telinit u |
1224 |
fi |
1225 |
if [ -x /etc/init.d/sshd -a \ |
1226 |
-x /usr/sbin/sshd -a \ |
1227 |
-x /bin/bash ]; then |
1228 |
/etc/init.d/sshd condrestart |
1229 |
fi |
1230 |
fi |
1231 |
fi |
1232 |
if [ -f /bin/rm ]; then |
1233 |
for i in %broken_link; do |
1234 |
if [ -e $i ] && [ ! -L $i ]; then |
1235 |
/bin/rm -f $i |
1236 |
fi |
1237 |
done |
1238 |
fi |
1239 |
fi |
1240 |
[ -x /bin/rm ] && /bin/rm -f %{upgradestamp} |
1241 |
|
1242 |
# always generate the gconv-modules.cache |
1243 |
%{_sbindir}/iconvconfig -o %{_libdir}/gconv/gconv-modules.cache --nostdlib %{_libdir}/gconv |
1244 |
|
1245 |
%endif |
1246 |
|
1247 |
%pre devel |
1248 |
if [ -L %{_includedir}/scsi ]; then |
1249 |
rm -f %{_includedir}/scsi |
1250 |
fi |
1251 |
if [ -L %{_includedir}/sound ]; then |
1252 |
rm -f %{_includedir}/sound |
1253 |
fi |
1254 |
if [ -L %{_includedir}/linux ]; then |
1255 |
rm -f %{_includedir}/linux |
1256 |
fi |
1257 |
if [ -L %{_includedir}/asm ]; then |
1258 |
rm -f %{_includedir}/asm |
1259 |
fi |
1260 |
if [ -L %{_includedir}/asm-generic ]; then |
1261 |
rm -f %{_includedir}/asm-generic |
1262 |
fi |
1263 |
%if %isarch x86_64 |
1264 |
if [ -L %{_includedir}/asm-x86_64 ]; then |
1265 |
rm -f %{_includedir}/asm-x86_64 |
1266 |
fi |
1267 |
if [ -L %{_includedir}/asm-i386 ]; then |
1268 |
rm -f %{_includedir}/asm-i386 |
1269 |
fi |
1270 |
%endif |
1271 |
%if %isarch ppc64 |
1272 |
if [ -L %{_includedir}/asm-ppc64 ]; then |
1273 |
rm -f %{_includedir}/asm-ppc64 |
1274 |
fi |
1275 |
if [ -L %{_includedir}/asm-ppc ]; then |
1276 |
rm -f %{_includedir}/asm-ppc |
1277 |
fi |
1278 |
%endif |
1279 |
%if %isarch sparc64 |
1280 |
if [ -L %{_includedir}/asm-sparc64 ]; then |
1281 |
rm -f %{_includedir}/asm-sparc64 |
1282 |
fi |
1283 |
if [ -L %{_includedir}/asm-sparc ]; then |
1284 |
rm -f %{_includedir}/asm-sparc |
1285 |
fi |
1286 |
%endif |
1287 |
exit 0 |
1288 |
|
1289 |
%if %{build_doc} |
1290 |
%post doc |
1291 |
%_install_info libc.info |
1292 |
|
1293 |
%preun doc |
1294 |
%_remove_install_info libc.info |
1295 |
%endif |
1296 |
|
1297 |
%if %{build_nscd} |
1298 |
%pre -n nscd |
1299 |
%_pre_useradd nscd / /bin/false |
1300 |
|
1301 |
%post -n nscd |
1302 |
%_post_service nscd |
1303 |
|
1304 |
%preun -n nscd |
1305 |
%_preun_service nscd |
1306 |
|
1307 |
%postun -n nscd |
1308 |
%_postun_userdel nscd |
1309 |
|
1310 |
if [ "$1" -ge "1" ]; then |
1311 |
/sbin/service nscd condrestart > /dev/null 2>&1 || : |
1312 |
fi |
1313 |
%endif |
1314 |
|
1315 |
%clean |
1316 |
#rm -rf "$RPM_BUILD_ROOT" |
1317 |
#rm -f *.filelist* |
1318 |
|
1319 |
# |
1320 |
# glibc |
1321 |
# |
1322 |
%files -f rpm.filelist |
1323 |
%defattr(-,root,root) |
1324 |
%if "%{name}" == "glibc" |
1325 |
%if %{build_timezone} |
1326 |
%verify(not md5 size mtime) %config(noreplace) %{_sysconfdir}/localtime |
1327 |
%endif |
1328 |
%verify(not md5 size mtime) %config(noreplace) %{_sysconfdir}/nsswitch.conf |
1329 |
%verify(not md5 size mtime) %config(noreplace) %{_sysconfdir}/ld.so.conf |
1330 |
%dir %{_sysconfdir}/ld.so.conf.d |
1331 |
%config(noreplace) %{_sysconfdir}/rpc |
1332 |
%doc nis/nss |
1333 |
%doc posix/gai.conf |
1334 |
%{_mandir}/man1/* |
1335 |
%{_mandir}/man8/rpcinfo.8* |
1336 |
%{_mandir}/man8/ld.so* |
1337 |
%{_datadir}/locale/locale.alias |
1338 |
/sbin/sln |
1339 |
%dir %{_prefix}/libexec/getconf |
1340 |
%{_prefix}/libexec/getconf/* |
1341 |
%endif |
1342 |
%{_slibdir}/ld-%{glibcversion}.so |
1343 |
%if %isarch i386 alpha sparc sparc64 |
1344 |
%{_slibdir}/ld-linux.so.2 |
1345 |
%endif |
1346 |
%if %isarch ppc |
1347 |
%{_slibdir}/ld.so.1 |
1348 |
%endif |
1349 |
%if %isarch ppc64 |
1350 |
%{_slibdir}/ld64.so.1 |
1351 |
%endif |
1352 |
%if %isarch ia64 |
1353 |
%{_slibdir}/ld-linux-ia64.so.2 |
1354 |
%endif |
1355 |
%if %isarch x86_64 |
1356 |
%{_slibdir}/ld-linux-x86-64.so.2 |
1357 |
%endif |
1358 |
%if %isarch m68k |
1359 |
%{_slibdir}/ld.so.1 |
1360 |
%endif |
1361 |
%{_slibdir}/lib*-[.0-9]*.so |
1362 |
%{_slibdir}/lib*.so.[0-9]* |
1363 |
%{_slibdir}/libSegFault.so |
1364 |
%if "%{name}" == "glibc" |
1365 |
%dir %{_libdir}/gconv |
1366 |
%{_libdir}/gconv/*.so |
1367 |
%{_libdir}/gconv/gconv-modules |
1368 |
%ghost %{_libdir}/gconv/gconv-modules.cache |
1369 |
%attr(4755,root,root) %{_prefix}/libexec/pt_chown |
1370 |
%{_bindir}/catchsegv |
1371 |
%{_bindir}/gencat |
1372 |
%{_bindir}/getconf |
1373 |
%{_bindir}/getent |
1374 |
#%{_bindir}/glibcbug |
1375 |
%{_bindir}/iconv |
1376 |
%{_bindir}/ldd |
1377 |
%if %isarch i386 ppc sparc sparc64 |
1378 |
%{_bindir}/lddlibc4 |
1379 |
%endif |
1380 |
%{_bindir}/locale |
1381 |
%{_bindir}/localedef |
1382 |
%{_bindir}/rpcgen |
1383 |
%{_bindir}/sprof |
1384 |
%{_bindir}/tzselect |
1385 |
%{_sbindir}/rpcinfo |
1386 |
%{_sbindir}/iconvconfig |
1387 |
%{_sbindir}/glibc-post-wrapper |
1388 |
%endif |
1389 |
|
1390 |
%if %{build_biarch} |
1391 |
%{_slibdir32}/ld-%{glibcversion}.so |
1392 |
%if %isarch ppc64 |
1393 |
%{_slibdir32}/ld.so.1 |
1394 |
%else |
1395 |
%{_slibdir32}/ld-linux*.so.2 |
1396 |
%endif |
1397 |
%{_slibdir32}/lib*-[.0-9]*.so |
1398 |
%{_slibdir32}/lib*.so.[0-9]* |
1399 |
%{_slibdir32}/libSegFault.so |
1400 |
%dir %{_prefix}/lib/gconv |
1401 |
%{_prefix}/lib/gconv/* |
1402 |
%endif |
1403 |
# |
1404 |
# ldconfig |
1405 |
# |
1406 |
%if "%{name}" == "glibc" |
1407 |
%defattr(-,root,root) |
1408 |
/sbin/ldconfig |
1409 |
%{_mandir}/man8/ldconfig* |
1410 |
%ghost %{_sysconfdir}/ld.so.cache |
1411 |
%dir %{_var}/cache/ldconfig |
1412 |
%ghost %{_var}/cache/ldconfig/aux-cache |
1413 |
%{_var}/lib/rpm/filetriggers/ldconfig.* |
1414 |
%endif |
1415 |
|
1416 |
# |
1417 |
# glibc-devel |
1418 |
# |
1419 |
%files devel -f devel.filelist |
1420 |
%defattr(-,root,root) |
1421 |
%doc README NEWS INSTALL FAQ BUGS NOTES PROJECTS CONFORMANCE |
1422 |
%doc COPYING COPYING.LIB |
1423 |
%doc documentation/* README.libm |
1424 |
%doc hesiod/README.hesiod |
1425 |
%doc crypt/README.ufc-crypt |
1426 |
%{_mandir}/man3/* |
1427 |
%{_libdir}/libbsd-compat.a |
1428 |
%{_libdir}/libbsd.a |
1429 |
%{_libdir}/libc_nonshared.a |
1430 |
%{_libdir}/libg.a |
1431 |
%{_libdir}/libieee.a |
1432 |
%{_libdir}/libmcheck.a |
1433 |
%{_libdir}/libpthread_nonshared.a |
1434 |
%if "%{name}" == "glibc" |
1435 |
%{_libdir}/librpcsvc.a |
1436 |
%endif |
1437 |
%if %isarch ppc ppc64 sparc |
1438 |
%{_libdir}/libnldbl_nonshared.a |
1439 |
%endif |
1440 |
|
1441 |
%if %{build_biarch} |
1442 |
%{_prefix}/lib/libbsd-compat.a |
1443 |
%{_prefix}/lib/libbsd.a |
1444 |
%{_prefix}/lib/libc_nonshared.a |
1445 |
%{_prefix}/lib/libg.a |
1446 |
%{_prefix}/lib/libieee.a |
1447 |
%{_prefix}/lib/libmcheck.a |
1448 |
%{_prefix}/lib/libpthread_nonshared.a |
1449 |
%{_prefix}/lib/librpcsvc.a |
1450 |
%if %isarch ppc64 sparc64 |
1451 |
%{_prefix}/lib/libnldbl_nonshared.a |
1452 |
%endif |
1453 |
%endif |
1454 |
|
1455 |
# |
1456 |
# glibc-static-devel |
1457 |
# |
1458 |
%files static-devel |
1459 |
%defattr(-,root,root) |
1460 |
%doc COPYING COPYING.LIB |
1461 |
%{_libdir}/libBrokenLocale.a |
1462 |
%{_libdir}/libanl.a |
1463 |
%{_libdir}/libc.a |
1464 |
%{_libdir}/libcrypt.a |
1465 |
%{_libdir}/libdl.a |
1466 |
%{_libdir}/libm.a |
1467 |
%{_libdir}/libnsl.a |
1468 |
%{_libdir}/libpthread.a |
1469 |
%{_libdir}/libresolv.a |
1470 |
%{_libdir}/librt.a |
1471 |
%{_libdir}/libutil.a |
1472 |
|
1473 |
%if %{build_biarch} |
1474 |
%{_prefix}/lib/libBrokenLocale.a |
1475 |
%{_prefix}/lib/libanl.a |
1476 |
%{_prefix}/lib/libc.a |
1477 |
%{_prefix}/lib/libcrypt.a |
1478 |
%{_prefix}/lib/libdl.a |
1479 |
%{_prefix}/lib/libm.a |
1480 |
%{_prefix}/lib/libnsl.a |
1481 |
%{_prefix}/lib/libpthread.a |
1482 |
%{_prefix}/lib/libresolv.a |
1483 |
%{_prefix}/lib/librt.a |
1484 |
%{_prefix}/lib/libutil.a |
1485 |
%endif |
1486 |
|
1487 |
# |
1488 |
# glibc-doc |
1489 |
# |
1490 |
%if %{build_doc} |
1491 |
%files doc |
1492 |
%defattr(-,root,root) |
1493 |
%{_infodir}/libc.info* |
1494 |
%endif |
1495 |
|
1496 |
# |
1497 |
# glibc-doc-pdf |
1498 |
# |
1499 |
%if %{build_pdf_doc} |
1500 |
%files doc-pdf |
1501 |
%defattr(-,root,root) |
1502 |
%doc manual/libc.pdf |
1503 |
%endif |
1504 |
|
1505 |
# |
1506 |
# glibc-debug |
1507 |
# |
1508 |
%if %{build_debug} |
1509 |
%files debug |
1510 |
%defattr(-,root,root) |
1511 |
%dir %{_libdir}/debug |
1512 |
%{_libdir}/debug/*.so |
1513 |
%{_libdir}/debug/*.so.* |
1514 |
%endif |
1515 |
|
1516 |
# |
1517 |
# glibc-profile |
1518 |
# |
1519 |
%if %{build_profile} |
1520 |
%files profile |
1521 |
%defattr(-,root,root) |
1522 |
%{_libdir}/lib*_p.a |
1523 |
%if %{build_biarch} |
1524 |
%{_prefix}/lib/lib*_p.a |
1525 |
%endif |
1526 |
%endif |
1527 |
|
1528 |
# |
1529 |
# glibc-utils |
1530 |
# |
1531 |
%if %{build_utils} |
1532 |
%files utils |
1533 |
%defattr(-,root,root) |
1534 |
%if %{build_biarch} |
1535 |
%{_slibdir32}/libmemusage.so |
1536 |
%{_slibdir32}/libpcprofile.so |
1537 |
%endif |
1538 |
%{_slibdir}/libmemusage.so |
1539 |
%{_slibdir}/libpcprofile.so |
1540 |
%{_bindir}/memusage |
1541 |
%{_bindir}/memusagestat |
1542 |
%{_bindir}/mtrace |
1543 |
%{_bindir}/pcprofiledump |
1544 |
%{_bindir}/xtrace |
1545 |
%endif |
1546 |
|
1547 |
# |
1548 |
# nscd |
1549 |
# |
1550 |
%if %{build_nscd} |
1551 |
%files -n nscd |
1552 |
%defattr(-,root,root) |
1553 |
%config(noreplace) %{_sysconfdir}/nscd.conf |
1554 |
%config(noreplace) %{_initrddir}/nscd |
1555 |
%{_sbindir}/nscd |
1556 |
%endif |
1557 |
|
1558 |
# |
1559 |
# timezone |
1560 |
# |
1561 |
%if %{build_timezone} |
1562 |
%files -n timezone |
1563 |
%defattr(-,root,root) |
1564 |
%{_sbindir}/zdump |
1565 |
%{_sbindir}/zic |
1566 |
%{_mandir}/man1/zdump.1* |
1567 |
%dir %{_datadir}/zoneinfo |
1568 |
%{_datadir}/zoneinfo/* |
1569 |
%endif |
1570 |
|
1571 |
# |
1572 |
# glibc-i18ndata |
1573 |
# |
1574 |
%if %{build_i18ndata} |
1575 |
%files i18ndata |
1576 |
%defattr(-,root,root) |
1577 |
%dir %{_datadir}/i18n |
1578 |
%dir %{_datadir}/i18n/charmaps |
1579 |
%{_datadir}/i18n/charmaps/* |
1580 |
%dir %{_datadir}/i18n/locales |
1581 |
%{_datadir}/i18n/locales/* |
1582 |
%{_datadir}/i18n/SUPPORTED |
1583 |
%endif |
1584 |
|
1585 |
|
1586 |
|
1587 |
|