1 |
- fix driver for some r128 cards (mga#7867) |
2 |
|
3 |
Versino 0.1.311 - 22 November 2012 |
4 |
|
5 |
- switch DRIVER2 for GeForce 7xxx and GeForce 8xxx cards to the |
6 |
newly added 304.xx series proprietary driver as support is |
7 |
dropped from nvidia-current |
8 |
|
9 |
Version 0.1.310 - 31 October 2012 |
10 |
|
11 |
- Cards+ |
12 |
o enable nvidia173 driver again as it supports x11-server 1.13 |
13 |
- pcitable |
14 |
o add new ids from fglrx-9.010 |
15 |
|
16 |
Version 0.1.309 - 30 September 2012 |
17 |
|
18 |
- pcitable |
19 |
o add new ids from nvidia-current-304.51 |
20 |
|
21 |
Version 0.1.308 - 14 September 2012 |
22 |
|
23 |
- pcitable |
24 |
o add new ids from nvidia-current-304.43 |
25 |
o add new ids from fglrx-9.00 |
26 |
|
27 |
Version 0.1.307 - 7 September 2012 |
28 |
|
29 |
- remove "wl" driver for 0x14e4:0x4727 (mga#6122) |
30 |
- remove two other "wl" references |
31 |
|
32 |
Version 0.1.306 - 19 August 2012 |
33 |
|
34 |
- pcitable |
35 |
o update ids from x11-driver-video-ati-6.14.6 |
36 |
o update ids from nvidia-current-304.37 |
37 |
- Monitor DB |
38 |
o add Samsung SMS19A100 |
39 |
|
40 |
Version 0.1.305 - 2 July 2012 |
41 |
|
42 |
- update ids from the proprietary nvidia-current-295.59 |
43 |
|
44 |
Version 0.1.304 - 6 June 2012 |
45 |
|
46 |
- update AMD/ATI Cards+ entries from the proprietary driver |
47 |
o HD 4000 and below are no longer supported by it, so the free driver |
48 |
is now always used for those |
49 |
|
50 |
Version 0.1.303 - 13 May 2012 |
51 |
|
52 |
- add another intel id from kernel-3.3.6 |
53 |
- add new NVIDIA ids from the proprietary nvidia-current-295.49 |
54 |
- Monitor DB |
55 |
o add SyncMaster XL2370 (mga#5315) |
56 |
|
57 |
Version 0.1.302 - 2 May 2012 |
58 |
|
59 |
- drop DKMS data about r8192se_pci & rt3090sta* (mga#5681) |
60 |
|
61 |
Version 0.1.301 - 28 April 2012 |
62 |
|
63 |
- use fbdev for "Poulsbo US15W(GMA500)" (mga#5633) |
64 |
|
65 |
Version 0.1.300 - 05 April 2012 |
66 |
|
67 |
- disable nvidia96xx as third driver when nvidia cannot be used due to |
68 |
missing SSE support |
69 |
- refuse to set up nvidia if SSE support is not available |
70 |
- Monitor DB |
71 |
o add BENQ G2320HDB (mga#397) |
72 |
- add new AMD ids from the proprietary and free drivers |
73 |
- add new NVIDIA ids from the proprietary driver |
74 |
- restructure AMD/ATI Cards+ entries for HD 2000 and newer |
75 |
o separate those that support usermode modesetting |
76 |
o add the necessary FIRMWARE and DRIVER_NO_FIRMWARE entries as per |
77 |
mga bug #3466 |
78 |
o do not assign anything to the old unmaintained radeonhd driver |
79 |
- switch NVIDIA NVD9/GF119 cards from vesa to nouveau |
80 |
|
81 |
Version 0.1.299 - 10 December 2011 |
82 |
|
83 |
- Monitor DB |
84 |
o sync with latest Fedora |
85 |
|
86 |
Version 0.1.298 - 10 December 2011 |
87 |
|
88 |
- update pci.ids & usb.ids (mga#3677) |
89 |
|
90 |
Version 0.1.297 - 02 December 2011 |
91 |
|
92 |
- add new ATI ids from the free and proprietary drivers |
93 |
- add new NVIDIA ids from the proprietary driver |
94 |
- disable nvidia173 and nvidia96xx as they do not support X.org server |
95 |
1.11) |
96 |
- add new Intel ids from the i915 driver |
97 |
- switch NVIDIA Fermi (400/500 series) from vesa to nouveau driver |
98 |
except for some PMC.ID 0xd9 cards (GF410/510/520 and Quadro 4200M) |
99 |
that will only get support in kernel 3.2 |
100 |
|
101 |
Version 0.1.296 - 27 November 2011 |
102 |
|
103 |
- add nvidia 0x0df4 (mga#3499) |
104 |
- add Samsung SyncMaster 933SN (mga#1658) |
105 |
|
106 |
Version 0.1.295 - 23 November 2011 |
107 |
|
108 |
- fix for mga #933 must filter on subvendor/subdevice in order to fix |
109 |
mga #1525 |
110 |
|
111 |
Version 0.1.294 - 23 November 2011 |
112 |
|
113 |
- move back ldetect-lst-modules.alias in /lib/module-init-tools/, |
114 |
it needs to be parsed in its own group, so that modprobe.d/*.conf |
115 |
files are preferred over it |
116 |
|
117 |
Version 0.1.293 - 21 November 2011 |
118 |
|
119 |
- add support for virtual gfx card |
120 |
- drop obsolete pcitable.ia64 (either redundant or invalid) |
121 |
- reenable nvidia96xx (support for x.org server 1.10 was added with 96.43.20) |
122 |
- move preferred aliases list back to /etc/modprobe.d |
123 |
(still read before kernel ones) |
124 |
|
125 |
Version 0.1.292 - 01 August 2011 |
126 |
|
127 |
- add new ATI ids from the free and proprietary drivers |
128 |
- add support for all new Intel Sandy Bridge graphics devices (mga#1401) |
129 |
- add support for QXL virtual video card |
130 |
- add support for wl driver (#2266) |
131 |
- disable nvidia96xx (not compatible with x.org server 1.10) |
132 |
- prefer amd74xx module for nForce MCP51 IDE (mga#933, mdv#49957) |
133 |
- switch 1002:9610 back to ati driver (mga #1267) |
134 |
- make the names of the last two Cards using radeonhd/fglrx more specific |
135 |
- make 'MAX' in pnp.ids point to Maxdata (for some Belinea monitors) |
136 |
|
137 |
Version 0.1.291 - 22 March 2011 |
138 |
|
139 |
- add new NVIDIA ids from the proprietary driver |
140 |
- add new ATI ids from the prorietary driver and the free driver |
141 |
- update ATI ids from xf86-video-ati-6.14.1 |
142 |
|
143 |
Version 0.1.290 - 19 December 2010 |
144 |
|
145 |
- add new NVIDIA ids from the proprietary driver |
146 |
- update pci.ids usb.ids oui.txt |
147 |
|
148 |
Version 0.1.289 - 22 October 2010 |
149 |
|
150 |
- add new NVIDIA ids from the proprietary driver |
151 |
- add new ATI ids from the free ati driver and the proprietary driver |
152 |
|
153 |
Version 0.1.288 - 18 August 2010 |
154 |
|
155 |
- update to latest usb.ids from linux-usb.org |
156 |
- add the product names corresponding to the appropriate usb product ids for |
157 |
Samsung's new G4 USB which the firmware fails to provide & identify itself by |
158 |
|
159 |
Version 0.1.287 - 11 June 2010 |
160 |
|
161 |
- add new NVIDIA ids from the proprietary driver (#59714), assigning the |
162 |
Fermi cards to a new GF400+ class for vesa/nvidia-current |
163 |
|
164 |
Version 0.1.286 - 11 May 2010 |
165 |
|
166 |
- switch back 0x10de:0x0110 to using the proprietary driver (#57539) |
167 |
- remove imwheel support (replace with evdev) |
168 |
- switch ATI cards now supported by radeon to it from vesa |
169 |
(HD 5000 series cards) |
170 |
|
171 |
Version 0.1.285 - 30 March 2010 |
172 |
|
173 |
- add new NVIDIA ids from nvidia-current |
174 |
- add new ATI ids from fglrx |
175 |
- switch ATI cards now supported by radeon to it from vesa |
176 |
- re-enable ATI proprietary driver |
177 |
|
178 |
Version 0.1.284 - 25 February 2010 |
179 |
|
180 |
- make imstt cards use vesa driver (imstt driver doesn't exist since 2009.1) |
181 |
- make MediaGX cards use geode instead of cyrix |
182 |
- make Intel Vermilion cards use vesa since vermilion doesn't work |
183 |
- drop vga driver which is no longer working |
184 |
- drop i810 driver which is no longer working |
185 |
- add support for Intel Atom "Pineview G" and "Pineview GM" integrated |
186 |
graphics adapters |
187 |
- add support for desktop and mobile Intel Core i3/i5 integrated |
188 |
graphics adapters |
189 |
- add support for Intel B43 graphics adapter |
190 |
- disable NVidia propretary driver on 0x10de:0x0110 as it segfaults on |
191 |
2010.0 |
192 |
- add new ATI ids from fglrx 8.690 (10.1) |
193 |
|
194 |
Version 0.1.281 - 3 January 2010 |
195 |
|
196 |
- disable ATI propretary driver for now, it doesn't support X.org |
197 |
server 1.7+ |
198 |
- update various ATI ids as per current free driver ID lists (some |
199 |
cards were switched from radeonhd to radeon, and some to vesa) |
200 |
- remove ATI IDs that are not supported by any driver |
201 |
|
202 |
Version 0.1.280 - 24 December 2009 |
203 |
|
204 |
- Monitor DB |
205 |
o add entry for 'Samsung SyncMaster 2233SW (Charles A Edwards) |
206 |
o add entry for 'Samsung SyncMaster 2494HS' (Marek Laane) |
207 |
- add new NVIDIA ids from nvidia-current 190.42 |
208 |
- add new ATI ids from fglrx 8.671, 8.681 assigned to |
209 |
fglrx+radeonhd |
210 |
- switch all HD 5000 series ATI ids from ati to radeonhd |
211 |
- use nouveau as default free driver for NVIDIA cards, except for |
212 |
Riva 128 (NV03) which is not supported by it |
213 |
- re-enable proprietary NVIDIA driver on G105M, issue fixed upstream |
214 |
|
215 |
Version 0.1.279 - 27 October 2009 |
216 |
|
217 |
- really tag for 10de:06ec as not working with nvidia driver (#54862) |
218 |
- use nvidia173 for 10de:2362 (#54768) |
219 |
|
220 |
Version 0.1.278 - 15 October 2009 |
221 |
|
222 |
- select openchrome driver for 0x1106:0x1122 |
223 |
- Monitor DB |
224 |
o add entry for 'Iiyama Prolite E2607WS' (#54225) |
225 |
o add entry for 'MAG LT717s' and default to 1280x1024 (#49656) |
226 |
o add entry for 'Samsung SyncMaster 2343BW' (Dick Gevers) |
227 |
|
228 |
Version 0.1.277 - 8 October 2009 |
229 |
|
230 |
- use lower horizsync for 800x480 (28.8 kHz for WeSurf and Compal Jax10) |
231 |
- add LCD Panel 1366x768 entry (#47706) |
232 |
- add monitor entry for Asus 1101HA (#47706) |
233 |
- add Samsung SyncMaster 732NW (from Sergio Rafael Lemke) |
234 |
- use psb video driver for Intel 0x8108 and 0x8109 |
235 |
|
236 |
Version 0.1.276 - 6 October 2009 |
237 |
|
238 |
- enable to automatically add new ATI cards from |
239 |
dkms-modules-info/dkms-modules.alias where fglrx declares what it |
240 |
supports |
241 |
- add Cards+ entry for Intel Poulsbo US15W (GMA500), using the psb driver |
242 |
- Monitor DB |
243 |
- add Samsung SyncMaster 2243SN (Reinout van Schouwen) |
244 |
|
245 |
Version 0.1.275 - 25 September 2009 |
246 |
|
247 |
- add support for 0x10de:0x06ec (G98M [GeForce G 105M]) which only |
248 |
works with nv (#54000) |
249 |
- add quite a lot of new nvidia cards definition from NV_WHQL.inf from |
250 |
windows driver 186.82) |
251 |
- remove quite a lot of usb devices descriptions that came from usb.ids |
252 |
|
253 |
Version 0.1.274 - 23 September 2009 |
254 |
|
255 |
- radeonhd failed on 0x1002:0x9480 (#53183) |
256 |
|
257 |
Version 0.1.273 - 23 September 2009 |
258 |
|
259 |
- dc2xx is now obsoleted by userspace |
260 |
- drop obsolete 'cs46xx', 'cs5535', 'maestro', 'maestro3', & 'ymfpci' |
261 |
entries |
262 |
|
263 |
Version 0.1.272 - 23 September 2009 |
264 |
|
265 |
- kill all 0x10ec:0x8139:*:* entries (ldetect now try to choose |
266 |
bettwen "8139cp" & "8139too" according to PCI revision like |
267 |
performed by the kernel) (#53349) |
268 |
|
269 |
Version 0.1.271 - 22 September 2009 |
270 |
|
271 |
- auerswald, hp5300, hpusbscsi, rio500 & tiglusb are obsoleted by |
272 |
userspace |
273 |
- fix obsoleted drivers: |
274 |
o CDCEther => cdc_ether |
275 |
o hci_usb => btusb |
276 |
o mtouchusb => usbtouchscreen |
277 |
o ov518_decomp => gspca_ov519 |
278 |
o phidgetservo => hid |
279 |
o touchkitusb => usbtouchscreen |
280 |
|
281 |
Version 0.1.270 - 22 September 2009 |
282 |
|
283 |
- fix obsoleted drivers: |
284 |
o b2c2_usb => b2c2-flexcop-usb |
285 |
o cy82c693 => pata_cypress |
286 |
o dtc => initio |
287 |
o generic => ata_generic and ide-pci-generic |
288 |
o maestro3 => snd_maestro3 |
289 |
o snd_gina3g => snd-echo3g |
290 |
o sonypi => i2c-piix4 |
291 |
o sonicvibes => snd-sonicvibes |
292 |
|
293 |
Version 0.1.269 - 22 September 2009 |
294 |
|
295 |
- add new ATI ids from fglrx |
296 |
- mod_quicikame doesn't exist anymore (#52176) |
297 |
- tag one more "nVidia Geforce2 MX/MX" as GeForce 3 so that it can |
298 |
uses 3D (#53841) |
299 |
|
300 |
Version 0.1.268 - 18 September 2009 |
301 |
|
302 |
- fix 2 Matrox entries |
303 |
- Monitor DB |
304 |
o sync with latest Fedora (new Dell monitors) |
305 |
|
306 |
Version 0.1.267 - 18 September 2009 |
307 |
|
308 |
- add support for the last missing from Matrox card |
309 |
- fix invalid Horzsync for 6 'Generic CRT Display; Monitor' and a |
310 |
couple Acer & Philips monitors (#48063) |
311 |
- use fglrx again with ATI Mobility Radeon HD 3400 (now working) |
312 |
|
313 |
Version 0.1.266 - 15 September 2009 |
314 |
|
315 |
- sync ati list with latest driver |
316 |
|
317 |
Version 0.1.265 - 15 September 2009 |
318 |
|
319 |
- sync nvidia list with latest driver |
320 |
|
321 |
Version 0.1.264 - 15 September 2009 |
322 |
|
323 |
- add support for one Matrox card (#53564) |
324 |
|
325 |
Version 0.1.263 - 9 September 2009 |
326 |
|
327 |
- add support for ION video card (#53515) |
328 |
- Monitor DB |
329 |
o sync with latest Fedora (new Dell monitors) |
330 |
|
331 |
Version 0.1.262 - 13 August 2009 |
332 |
|
333 |
- update usbtable to get proper descriptions for USB devices |
334 |
- add GeForce 9400 (nvidia-current / vesa) |
335 |
- use newer intel driver for 8086:3582:1179:0002, fixes bug #44371 |
336 |
- do not choose siimage when pata_sil680 works too since the former |
337 |
seems no longuer to work (#52736) |
338 |
- fix loading '8139too' over '8139cp' on 10ec:8139:5853:0001 (#51520) |
339 |
|
340 |
Version 0.1.261 - 23 April 2009 |
341 |
|
342 |
- propagate the following changes from anssi (2009-04-01) into |
343 |
pcitable.x86_64 too, thus fixing wrongly using 'vesa' driver on some |
344 |
machines: |
345 |
o prefer "ati"/"radeon" driver over "radeonhd" |
346 |
o add new ATI ids from fglrx, ati and radeonhd |
347 |
o do not use fglrx with old Radeon cards |
348 |
|
349 |
Version 0.1.260 - 21 April 2009 |
350 |
|
351 |
- Monitor DB |
352 |
o sync with latest Fedora (new Dell monitors) |
353 |
- drop amd64_agp entries (#43870) |
354 |
|
355 |
Version 0.1.259 - 20 April 2009 |
356 |
|
357 |
- fix preferring pata_marvell over ahci (#43975) |
358 |
|
359 |
Version 0.1.258 - 1 April 2009 |
360 |
|
361 |
- do not try to use nv for 0x10de:0x053e (#48684) |
362 |
- do not use fglrx with ATI Mobility Radeon HD 3400 (Andriy Rysin reported |
363 |
a failure with fglrx 8.600) |
364 |
- Monitor DB |
365 |
o add Samsung SyncMaster 2043NW (Jaanus Ojangu) |
366 |
- prefer pata_marvell over ahci since ahci need marvel_enabled=1 to make it work (#43975) |
367 |
- prism2_plx was removed from kernel, switch the only entry that was |
368 |
using it to orinoco_tmd (0x15e8:0x0131) |
369 |
- remove dpc7146 entry since it was dropped from kernel |
370 |
- use radeonhd instead of ati for ATI Radeon HD 3200 0x9610 (#49824) |
371 |
|
372 |
Version 0.1.257 - 1 April 2009 |
373 |
|
374 |
- only use Intel 810 for a specic subvendor/subdevice of 0x8086:0x3582 |
375 |
- Monitor DB |
376 |
o add a lot of Proview monitors (Yannick56, #49104) |
377 |
o add Samsung SyncMaster 2253BW |
378 |
- prefer "ati"/"radeon" driver over "radeonhd" |
379 |
- add new ATI ids from fglrx, ati and radeonhd |
380 |
- do not use fglrx with old Radeon cards |
381 |
- add "GeForce (nouveau driver, experimental)" to allow users to test nouveau |
382 |
by selecting it in XFdrake |
383 |
|
384 |
Version 0.1.256 - 24 March 2009 |
385 |
|
386 |
- fix driver for "nVidia Corporation|NV11 [GeForce2 MX/MX 400]" (#48928) |
387 |
- add new NVIDIA ids from 180.41 |
388 |
- use e100 instead of eepro100 since kernel team disabled the latest (#49085) |
389 |
- Monitor DB |
390 |
o add Sony TV Bravia KDL-32D3000 (fcrozat) |
391 |
o add Samsung SyncMaster 2053BW (dams) |
392 |
|
393 |
Version 0.1.255 - 18 March 2009 |
394 |
|
395 |
- re-enable fglrx driver |
396 |
- use (old) Intel 810 driver for 0x8086:0x3582, fixes bug #44371 |
397 |
|
398 |
Version 0.1.254 - 16 March 2009 |
399 |
|
400 |
- Monitor DB |
401 |
o add Acer AL1716 (Steve Morris) |
402 |
o add Iiyama Prolite H481S (aapgorilla) |
403 |
o add Packard Bell Viseo 223Ws (patrick) |
404 |
|
405 |
Version 0.1.253 - 5 March 2009 |
406 |
|
407 |
- disable fglrx and nvidia71xx as they do not support X.org server 1.6 |
408 |
(IgnoreABI does not work for them) |
409 |
- use nvidia173 for non-SSE processors as well, the support was restored |
410 |
- Monitor DB |
411 |
o add back "LCD Panel 800x480" |
412 |
o add ViewSonic VX2260WM (Donald Stewart) |
413 |
o sync with latest Fedora |
414 |
|
415 |
Version 0.1.252 - 29 January 2009 |
416 |
|
417 |
- add new NVIDIA cards supported in 180.25 |
418 |
|
419 |
Version 0.1.251 - 16 January 2009 |
420 |
|
421 |
- re-work the blacklist of cards that don't work with nv to be |
422 |
more general and include more confirmed IDs |
423 |
|
424 |
Version 0.1.250 - 11 January 2009 |
425 |
|
426 |
- add NVIDIA GeForce 9400 GT ID, adjust 7050 group to include it |
427 |
(doesn't work with nv) |
428 |
|
429 |
Version 0.1.249 - 23 December 2008 |
430 |
|
431 |
- add new NVIDIA IDs from 180.18 |
432 |
- add new ATI IDs from 8.12 |
433 |
|
434 |
Version 0.1.248 - 3 December 2008 |
435 |
|
436 |
- Monitor DB |
437 |
o remove duplicated entries |
438 |
o sync with latest Fedora |
439 |
|
440 |
Version 0.1.247 - 2 December 2008 |
441 |
|
442 |
- Monitor DB |
443 |
o further sync with Fedora |
444 |
|
445 |
Version 0.1.246 - 2 December 2008 |
446 |
|
447 |
- fix "INTERNAL ERROR: good_default_monitor (Generic|*) is unknown in |
448 |
MonitorsDB" after syncing with redhat |
449 |
|
450 |
Version 0.1.245 - 29 November 2008 |
451 |
|
452 |
- NSC chips now use geode driver, nsc driver no longer builds |
453 |
- drop the special case for VIA K8M800, works OK with openchrome now |
454 |
- add new NVIDIA and ATI IDs from new driver versions |
455 |
- add "Flat Panel 1600x900" (#45091) |
456 |
- Monitor DB |
457 |
o sync monitor vendor names with Fedora |
458 |
o partial sync with Fedora |
459 |
- use "i810" instead of "intel" driver on older i810 because it |
460 |
segfaults when using XAA acceleration (#43916) |
461 |
|
462 |
Version 0.1.244 - 13 November 2008 |
463 |
|
464 |
- add new mouse definition (Logitech G5v2) |
465 |
- vesa not framebuffer for ST Kyro, per dams |
466 |
- disable 3D on ATI Rage 128-based cards (hard lock the machine on |
467 |
x86_64) |
468 |
- use pata_cs5536 for Geode IDE controllers |
469 |
- default to 800x480 on TECO TR2350 (Omatek netbook) |
470 |
|
471 |
Version 0.1.243 - 01 October 2008 |
472 |
|
473 |
- updated DKMS alias DB |
474 |
|
475 |
Version 0.1.242 - 01 October 2008 |
476 |
|
477 |
- drop separate Radeon HD 4xxx category: radeonhd supports these now |
478 |
|
479 |
Version 0.1.241 - 30 September 2008 |
480 |
|
481 |
- add ID 0605 for NVIDIA GeForce 9800 GT (reported and tested by Zoida A) |
482 |
|
483 |
Version 0.1.240 - 25 September 2008 |
484 |
|
485 |
- update dkms modules info |
486 |
|
487 |
Version 0.1.239 - 18 September 2008 |
488 |
|
489 |
- update dkms modules info (mainly for rt2860 and rtl8187se) |
490 |
|
491 |
Version 0.1.238 - 18 September 2008 |
492 |
|
493 |
- add support for Intel G41 graphics adapter |
494 |
- use 'vesa' driver not 'nv' for GeForce 7050 (#38391) |
495 |
|
496 |
Version 0.1.237 - 4 September 2008 |
497 |
|
498 |
- use pata_jmicron for jmicron controllers |