Version 0.1.320 - 13 April 2013 - nuke ancient dkms-modules-info/* - map broadcom-wl driver for hw with no free alternative: * 0x4313 / BCM4311 * 0x432a / BCM4321 * 0x432d / BCM4322 * 0x435a / BCM43228 * 0xa99d / BCM43421 Version 0.1.319 - 10 April 2013 - use "modesetting" for "Poulsbo US15W(GMA500)" (mga#8258) Version 0.1.318 - 28 March 2013 - dabusb & ultracam no more exist - some modules were replaced: o cpia-usb, ibmcam, konicawc, ov511, stv680 & w9968cf => gspca* o radio-maestro => snd_es1968 o touchkitusb => usbtouchscreen Version 0.1.317 - 28 March 2013 - at76_usb was replaced by at76c50x-usb Version 0.1.316 - 28 March 2013 - kill "hci_usb" entries (mga#5841) (removed from kernel in 2008) Version 0.1.315 - 22 March 2013 - disable acceleration on SiS as it crashes (mga#7521) - pcitable: o update ids from proprietary nvidia-current 310.40 - update pci.ids & usb.ids Version 0.1.314 - 10 January 2013 - pcitable o drop all broadcom-wl ids from database to be able to configure and test free drivers through drakx tools Version 0.1.313 - 6 January 2013 - update pci.ids & usb.ids Version 0.1.312 - 6 December 2012 - fix driver for some r128 cards (mga#7867) Version 0.1.311 - 22 November 2012 - switch DRIVER2 for GeForce 7xxx and GeForce 8xxx cards to the newly added 304.xx series proprietary driver as support is dropped from nvidia-current Version 0.1.310 - 31 October 2012 - Cards+ o enable nvidia173 driver again as it supports x11-server 1.13 - pcitable o add new ids from fglrx-9.010 Version 0.1.309 - 30 September 2012 - pcitable o add new ids from nvidia-current-304.51 Version 0.1.308 - 14 September 2012 - pcitable o add new ids from nvidia-current-304.43 o add new ids from fglrx-9.00 Version 0.1.307 - 7 September 2012 - remove "wl" driver for 0x14e4:0x4727 (mga#6122) - remove two other "wl" references Version 0.1.306 - 19 August 2012 - pcitable o update ids from x11-driver-video-ati-6.14.6 o update ids from nvidia-current-304.37 - Monitor DB o add Samsung SMS19A100 Version 0.1.305 - 2 July 2012 - update ids from the proprietary nvidia-current-295.59 Version 0.1.304 - 6 June 2012 - update AMD/ATI Cards+ entries from the proprietary driver o HD 4000 and below are no longer supported by it, so the free driver is now always used for those Version 0.1.303 - 13 May 2012 - add another intel id from kernel-3.3.6 - add new NVIDIA ids from the proprietary nvidia-current-295.49 - Monitor DB o add SyncMaster XL2370 (mga#5315) Version 0.1.302 - 2 May 2012 - drop DKMS data about r8192se_pci & rt3090sta* (mga#5681) Version 0.1.301 - 28 April 2012 - use fbdev for "Poulsbo US15W(GMA500)" (mga#5633) Version 0.1.300 - 05 April 2012 - disable nvidia96xx as third driver when nvidia cannot be used due to missing SSE support - refuse to set up nvidia if SSE support is not available - Monitor DB o add BENQ G2320HDB (mga#397) - add new AMD ids from the proprietary and free drivers - add new NVIDIA ids from the proprietary driver - restructure AMD/ATI Cards+ entries for HD 2000 and newer o separate those that support usermode modesetting o add the necessary FIRMWARE and DRIVER_NO_FIRMWARE entries as per mga bug #3466 o do not assign anything to the old unmaintained radeonhd driver - switch NVIDIA NVD9/GF119 cards from vesa to nouveau Version 0.1.299 - 10 December 2011 - Monitor DB o sync with latest Fedora Version 0.1.298 - 10 December 2011 - update pci.ids & usb.ids (mga#3677) Version 0.1.297 - 02 December 2011 - add new ATI ids from the free and proprietary drivers - add new NVIDIA ids from the proprietary driver - disable nvidia173 and nvidia96xx as they do not support X.org server 1.11) - add new Intel ids from the i915 driver - switch NVIDIA Fermi (400/500 series) from vesa to nouveau driver except for some PMC.ID 0xd9 cards (GF410/510/520 and Quadro 4200M) that will only get support in kernel 3.2 Version 0.1.296 - 27 November 2011 - add nvidia 0x0df4 (mga#3499) - add Samsung SyncMaster 933SN (mga#1658) Version 0.1.295 - 23 November 2011 - fix for mga #933 must filter on subvendor/subdevice in order to fix mga #1525 Version 0.1.294 - 23 November 2011 - move back ldetect-lst-modules.alias in /lib/module-init-tools/, it needs to be parsed in its own group, so that modprobe.d/*.conf files are preferred over it Version 0.1.293 - 21 November 2011 - add support for virtual gfx card - drop obsolete pcitable.ia64 (either redundant or invalid) - reenable nvidia96xx (support for x.org server 1.10 was added with 96.43.20) - move preferred aliases list back to /etc/modprobe.d (still read before kernel ones) Version 0.1.292 - 01 August 2011 - add new ATI ids from the free and proprietary drivers - add support for all new Intel Sandy Bridge graphics devices (mga#1401) - add support for QXL virtual video card - add support for wl driver (#2266) - disable nvidia96xx (not compatible with x.org server 1.10) - prefer amd74xx module for nForce MCP51 IDE (mga#933, mdv#49957) - switch 1002:9610 back to ati driver (mga #1267) - make the names of the last two Cards using radeonhd/fglrx more specific - make 'MAX' in pnp.ids point to Maxdata (for some Belinea monitors) Version 0.1.291 - 22 March 2011 - add new NVIDIA ids from the proprietary driver - add new ATI ids from the prorietary driver and the free driver - update ATI ids from xf86-video-ati-6.14.1 Version 0.1.290 - 19 December 2010 - add new NVIDIA ids from the proprietary driver - update pci.ids usb.ids oui.txt Version 0.1.289 - 22 October 2010 - add new NVIDIA ids from the proprietary driver - add new ATI ids from the free ati driver and the proprietary driver Version 0.1.288 - 18 August 2010 - update to latest usb.ids from linux-usb.org - add the product names corresponding to the appropriate usb product ids for Samsung's new G4 USB which the firmware fails to provide & identify itself by Version 0.1.287 - 11 June 2010 - add new NVIDIA ids from the proprietary driver (#59714), assigning the Fermi cards to a new GF400+ class for vesa/nvidia-current Version 0.1.286 - 11 May 2010 - switch back 0x10de:0x0110 to using the proprietary driver (#57539) - remove imwheel support (replace with evdev) - switch ATI cards now supported by radeon to it from vesa (HD 5000 series cards) Version 0.1.285 - 30 March 2010 - add new NVIDIA ids from nvidia-current - add new ATI ids from fglrx - switch ATI cards now supported by radeon to it from vesa - re-enable ATI proprietary driver Version 0.1.284 - 25 February 2010 - make imstt cards use vesa driver (imstt driver doesn't exist since 2009.1) - make MediaGX cards use geode instead of cyrix - make Intel Vermilion cards use vesa since vermilion doesn't work - drop vga driver which is no longer working - drop i810 driver which is no longer working - add support for Intel Atom "Pineview G" and "Pineview GM" integrated graphics adapters - add support for desktop and mobile Intel Core i3/i5 integrated graphics adapters - add support for Intel B43 graphics adapter - disable NVidia propretary driver on 0x10de:0x0110 as it segfaults on 2010.0 - add new ATI ids from fglrx 8.690 (10.1) Version 0.1.281 - 3 January 2010 - disable ATI propretary driver for now, it doesn't support X.org server 1.7+ - update various ATI ids as per current free driver ID lists (some cards were switched from radeonhd to radeon, and some to vesa) - remove ATI IDs that are not supported by any driver Version 0.1.280 - 24 December 2009 - Monitor DB o add entry for 'Samsung SyncMaster 2233SW (Charles A Edwards) o add entry for 'Samsung SyncMaster 2494HS' (Marek Laane) - add new NVIDIA ids from nvidia-current 190.42 - add new ATI ids from fglrx 8.671, 8.681 assigned to fglrx+radeonhd - switch all HD 5000 series ATI ids from ati to radeonhd - use nouveau as default free driver for NVIDIA cards, except for Riva 128 (NV03) which is not supported by it - re-enable proprietary NVIDIA driver on G105M, issue fixed upstream Version 0.1.279 - 27 October 2009 - really tag for 10de:06ec as not working with nvidia driver (#54862) - use nvidia173 for 10de:2362 (#54768) Version 0.1.278 - 15 October 2009 - select openchrome driver for 0x1106:0x1122 - Monitor DB o add entry for 'Iiyama Prolite E2607WS' (#54225) o add entry for 'MAG LT717s' and default to 1280x1024 (#49656) o add entry for 'Samsung SyncMaster 2343BW' (Dick Gevers) Version 0.1.277 - 8 October 2009 - use lower horizsync for 800x480 (28.8 kHz for WeSurf and Compal Jax10) - add LCD Panel 1366x768 entry (#47706) - add monitor entry for Asus 1101HA (#47706) - add Samsung SyncMaster 732NW (from Sergio Rafael Lemke) - use psb video driver for Intel 0x8108 and 0x8109 Version 0.1.276 - 6 October 2009 - enable to automatically add new ATI cards from dkms-modules-info/dkms-modules.alias where fglrx declares what it supports - add Cards+ entry for Intel Poulsbo US15W (GMA500), using the psb driver - Monitor DB - add Samsung SyncMaster 2243SN (Reinout van Schouwen) Version 0.1.275 - 25 September 2009 - add support for 0x10de:0x06ec (G98M [GeForce G 105M]) which only works with nv (#54000) - add quite a lot of new nvidia cards definition from NV_WHQL.inf from windows driver 186.82) - remove quite a lot of usb devices descriptions that came from usb.ids Version 0.1.274 - 23 September 2009 - radeonhd failed on 0x1002:0x9480 (#53183) Version 0.1.273 - 23 September 2009 - dc2xx is now obsoleted by userspace - drop obsolete 'cs46xx', 'cs5535', 'maestro', 'maestro3', & 'ymfpci' entries Version 0.1.272 - 23 September 2009 - kill all 0x10ec:0x8139:*:* entries (ldetect now try to choose bettwen "8139cp" & "8139too" according to PCI revision like performed by the kernel) (#53349) Version 0.1.271 - 22 September 2009 - auerswald, hp5300, hpusbscsi, rio500 & tiglusb are obsoleted by userspace - fix obsoleted drivers: o CDCEther => cdc_ether o hci_usb => btusb o mtouchusb => usbtouchscreen o ov518_decomp => gspca_ov519 o phidgetservo => hid o touchkitusb => usbtouchscreen Version 0.1.270 - 22 September 2009 - fix obsoleted drivers: o b2c2_usb => b2c2-flexcop-usb o cy82c693 => pata_cypress o dtc => initio o generic => ata_generic and ide-pci-generic o maestro3 => snd_maestro3 o snd_gina3g => snd-echo3g o sonypi => i2c-piix4 o sonicvibes => snd-sonicvibes Version 0.1.269 - 22 September 2009 - add new ATI ids from fglrx - mod_quicikame doesn't exist anymore (#52176) - tag one more "nVidia Geforce2 MX/MX" as GeForce 3 so that it can uses 3D (#53841) Version 0.1.268 - 18 September 2009 - fix 2 Matrox entries - Monitor DB o sync with latest Fedora (new Dell monitors) Version 0.1.267 - 18 September 2009 - add support for the last missing from Matrox card - fix invalid Horzsync for 6 'Generic CRT Display; Monitor' and a couple Acer & Philips monitors (#48063) - use fglrx again with ATI Mobility Radeon HD 3400 (now working) Version 0.1.266 - 15 September 2009 - sync ati list with latest driver Version 0.1.265 - 15 September 2009 - sync nvidia list with latest driver Version 0.1.264 - 15 September 2009 - add support for one Matrox card (#53564) Version 0.1.263 - 9 September 2009 - add support for ION video card (#53515) - Monitor DB o sync with latest Fedora (new Dell monitors) Version 0.1.262 - 13 August 2009 - update usbtable to get proper descriptions for USB devices - add GeForce 9400 (nvidia-current / vesa) - use newer intel driver for 8086:3582:1179:0002, fixes bug #44371 - do not choose siimage when pata_sil680 works too since the former seems no longuer to work (#52736) - fix loading '8139too' over '8139cp' on 10ec:8139:5853:0001 (#51520) Version 0.1.261 - 23 April 2009 - propagate the following changes from anssi (2009-04-01) into pcitable.x86_64 too, thus fixing wrongly using 'vesa' driver on some machines: o prefer "ati"/"radeon" driver over "radeonhd" o add new ATI ids from fglrx, ati and radeonhd o do not use fglrx with old Radeon cards Version 0.1.260 - 21 April 2009 - Monitor DB o sync with latest Fedora (new Dell monitors) - drop amd64_agp entries (#43870) Version 0.1.259 - 20 April 2009 - fix preferring pata_marvell over ahci (#43975) Version 0.1.258 - 1 April 2009 - do not try to use nv for 0x10de:0x053e (#48684) - do not use fglrx with ATI Mobility Radeon HD 3400 (Andriy Rysin reported a failure with fglrx 8.600) - Monitor DB o add Samsung SyncMaster 2043NW (Jaanus Ojangu) - prefer pata_marvell over ahci since ahci need marvel_enabled=1 to make it work (#43975) - prism2_plx was removed from kernel, switch the only entry that was using it to orinoco_tmd (0x15e8:0x0131) - remove dpc7146 entry since it was dropped from kernel - use radeonhd instead of ati for ATI Radeon HD 3200 0x9610 (#49824) Version 0.1.257 - 1 April 2009 - only use Intel 810 for a specic subvendor/subdevice of 0x8086:0x3582 - Monitor DB o add a lot of Proview monitors (Yannick56, #49104) o add Samsung SyncMaster 2253BW - prefer "ati"/"radeon" driver over "radeonhd" - add new ATI ids from fglrx, ati and radeonhd - do not use fglrx with old Radeon cards - add "GeForce (nouveau driver, experimental)" to allow users to test nouveau by selecting it in XFdrake Version 0.1.256 - 24 March 2009 - fix driver for "nVidia Corporation|NV11 [GeForce2 MX/MX 400]" (#48928) - add new NVIDIA ids from 180.41 - use e100 instead of eepro100 since kernel team disabled the latest (#49085) - Monitor DB o add Sony TV Bravia KDL-32D3000 (fcrozat) o add Samsung SyncMaster 2053BW (dams) Version 0.1.255 - 18 March 2009 - re-enable fglrx driver - use (old) Intel 810 driver for 0x8086:0x3582, fixes bug #44371 Version 0.1.254 - 16 March 2009 - Monitor DB o add Acer AL1716 (Steve Morris) o add Iiyama Prolite H481S (aapgorilla) o add Packard Bell Viseo 223Ws (patrick) Version 0.1.253 - 5 March 2009 - disable fglrx and nvidia71xx as they do not support X.org server 1.6 (IgnoreABI does not work for them) - use nvidia173 for non-SSE processors as well, the support was restored - Monitor DB o add back "LCD Panel 800x480" o add ViewSonic VX2260WM (Donald Stewart) o sync with latest Fedora Version 0.1.252 - 29 January 2009 - add new NVIDIA cards supported in 180.25 Version 0.1.251 - 16 January 2009 - re-work the blacklist of cards that don't work with nv to be more general and include more confirmed IDs Version 0.1.250 - 11 January 2009 - add NVIDIA GeForce 9400 GT ID, adjust 7050 group to include it (doesn't work with nv) Version 0.1.249 - 23 December 2008 - add new NVIDIA IDs from 180.18 - add new ATI IDs from 8.12 Version 0.1.248 - 3 December 2008 - Monitor DB o remove duplicated entries o sync with latest Fedora Version 0.1.247 - 2 December 2008 - Monitor DB o further sync with Fedora Version 0.1.246 - 2 December 2008 - fix "INTERNAL ERROR: good_default_monitor (Generic|*) is unknown in MonitorsDB" after syncing with redhat Version 0.1.245 - 29 November 2008 - NSC chips now use geode driver, nsc driver no longer builds - drop the special case for VIA K8M800, works OK with openchrome now - add new NVIDIA and ATI IDs from new driver versions - add "Flat Panel 1600x900" (#45091) - Monitor DB o sync monitor vendor names with Fedora o partial sync with Fedora - use "i810" instead of "intel" driver on older i810 because it segfaults when using XAA acceleration (#43916) Version 0.1.244 - 13 November 2008 - add new mouse definition (Logitech G5v2) - vesa not framebuffer for ST Kyro, per dams - disable 3D on ATI Rage 128-based cards (hard lock the machine on x86_64) - use pata_cs5536 for Geode IDE controllers - default to 800x480 on TECO TR2350 (Omatek netbook) Version 0.1.243 - 01 October 2008 - updated DKMS alias DB Version 0.1.242 - 01 October 2008 - drop separate Radeon HD 4xxx category: radeonhd supports these now Version 0.1.241 - 30 September 2008 - add ID 0605 for NVIDIA GeForce 9800 GT (reported and tested by Zoida A) Version 0.1.240 - 25 September 2008 - update dkms modules info Version 0.1.239 - 18 September 2008 - update dkms modules info (mainly for rt2860 and rtl8187se) Version 0.1.238 - 18 September 2008 - add support for Intel G41 graphics adapter - use 'vesa' driver not 'nv' for GeForce 7050 (#38391) Version 0.1.237 - 4 September 2008 - use pata_jmicron for jmicron controllers