1 |
- pcitable: |
2 |
o update device ids from proprietary nvidia-current 319.32 |
3 |
|
4 |
Version 0.1.327 - 3 May 2013 |
5 |
|
6 |
- pcitable: |
7 |
o add missing NVIDIA Tesla/VGX device ids |
8 |
o update device ids from proprietary nvidia-current 319.17 |
9 |
o fix some incorrect NVIDIA card classifications (cosmetic) |
10 |
|
11 |
Version 0.1.326 - 2 May 2013 |
12 |
|
13 |
- pcitable: |
14 |
o drop hardcoding of free broadcom wireless drivers done in |
15 |
0.1.321, as it does not work as intended. |
16 |
|
17 |
Version 0.1.325 - 28 April 2013 |
18 |
|
19 |
- Cards+ |
20 |
o enable sis acceleration again as driver is now fixed |
21 |
|
22 |
Version 0.1.324 - 27 April 2013 |
23 |
|
24 |
- pcitable: |
25 |
o update device ids from x11-driver-video-ati-7.1.0-4.mga3 |
26 |
|
27 |
Version 0.1.323 - 25 April 2013 |
28 |
|
29 |
- pcitable: |
30 |
o update device ids from x11-driver-video-ati-7.1.0-3.mga3 |
31 |
o update device ids from i915 in kernel-3.8.8-3.mga3 |
32 |
|
33 |
Version 0.1.322 - 24 April 2013 |
34 |
|
35 |
- pcitable: |
36 |
o update device ids from proprietary fglrx-12.104 |
37 |
|
38 |
Version 0.1.321 - 24 April 2013 |
39 |
|
40 |
- map free drivers for broadcom wireless hw: |
41 |
* b43legacy |
42 |
0x4301 / BCM4301 |
43 |
0x4306 / BCM4306/2 |
44 |
0x4325 / BCM4306/2 |
45 |
* b43 |
46 |
0x4307 / BCM4306/3 |
47 |
0x4311 / BCM4311 |
48 |
0x4312 / BCM4311 |
49 |
0x4315 / BCM4312 |
50 |
0x4318 / BCM4318 |
51 |
0x4319 / BCM4318 |
52 |
0x4320 / BCM4320 |
53 |
0x4321 / BCM4321 |
54 |
0x4322 / BCM4322 |
55 |
0x4324 / BCM4309 |
56 |
0x4328 / BCM4321 |
57 |
0x4329 / BCM4321 |
58 |
0x432b / BCM4322 |
59 |
0x432c / BCM4322 |
60 |
0x4331 / BCM4331 |
61 |
0x4350 / BCM43222 |
62 |
0xa8d6 / BCM43222 |
63 |
0xa8d8 / BCM43224/5 |
64 |
* brcmfmac |
65 |
0x4330 / BCM4330 |
66 |
0x4334 / BCM4334 |
67 |
0xbd17 / BCM43236 |
68 |
0xbd1e / BCM43143 |
69 |
0xbd1f / BCM43242 |
70 |
* brcmsmac |
71 |
0x0576 / BCM43224 |
72 |
0x4353 / BCM43224 |
73 |
0x4357 / BCM43225 |
74 |
0x4727 / BCM4313 |
75 |
|
76 |
Version 0.1.320 - 13 April 2013 |
77 |
|
78 |
- nuke ancient dkms-modules-info/* |
79 |
- map broadcom-wl driver for hw with no free alternative: |
80 |
* 0x4313 / BCM4311 |
81 |
* 0x432a / BCM4321 |
82 |
* 0x432d / BCM4322 |
83 |
* 0x435a / BCM43228 |
84 |
* 0xa99d / BCM43421 |
85 |
|
86 |
Version 0.1.319 - 10 April 2013 |
87 |
|
88 |
- use "modesetting" for "Poulsbo US15W(GMA500)" (mga#8258) |
89 |
|
90 |
Version 0.1.318 - 28 March 2013 |
91 |
|
92 |
- dabusb & ultracam no more exist |
93 |
- some modules were replaced: |
94 |
o cpia-usb, ibmcam, konicawc, ov511, stv680 & w9968cf => gspca* |
95 |
o radio-maestro => snd_es1968 |
96 |
o touchkitusb => usbtouchscreen |
97 |
|
98 |
Version 0.1.317 - 28 March 2013 |
99 |
|
100 |
- at76_usb was replaced by at76c50x-usb |
101 |
|
102 |
Version 0.1.316 - 28 March 2013 |
103 |
|
104 |
- kill "hci_usb" entries (mga#5841) |
105 |
(removed from kernel in 2008) |
106 |
|
107 |
Version 0.1.315 - 22 March 2013 |
108 |
|
109 |
- disable acceleration on SiS as it crashes (mga#7521) |
110 |
- pcitable: |
111 |
o update ids from proprietary nvidia-current 310.40 |
112 |
- update pci.ids & usb.ids |
113 |
|
114 |
Version 0.1.314 - 10 January 2013 |
115 |
|
116 |
- pcitable |
117 |
o drop all broadcom-wl ids from database to be able to |
118 |
configure and test free drivers through drakx tools |
119 |
|
120 |
Version 0.1.313 - 6 January 2013 |
121 |
|
122 |
- update pci.ids & usb.ids |
123 |
|
124 |
Version 0.1.312 - 6 December 2012 |
125 |
|
126 |
- fix driver for some r128 cards (mga#7867) |
127 |
|
128 |
Version 0.1.311 - 22 November 2012 |
129 |
|
130 |
- switch DRIVER2 for GeForce 7xxx and GeForce 8xxx cards to the |
131 |
newly added 304.xx series proprietary driver as support is |
132 |
dropped from nvidia-current |
133 |
|
134 |
Version 0.1.310 - 31 October 2012 |
135 |
|
136 |
- Cards+ |
137 |
o enable nvidia173 driver again as it supports x11-server 1.13 |
138 |
- pcitable |
139 |
o add new ids from fglrx-9.010 |
140 |
|
141 |
Version 0.1.309 - 30 September 2012 |
142 |
|
143 |
- pcitable |
144 |
o add new ids from nvidia-current-304.51 |
145 |
|
146 |
Version 0.1.308 - 14 September 2012 |
147 |
|
148 |
- pcitable |
149 |
o add new ids from nvidia-current-304.43 |
150 |
o add new ids from fglrx-9.00 |
151 |
|
152 |
Version 0.1.307 - 7 September 2012 |
153 |
|
154 |
- remove "wl" driver for 0x14e4:0x4727 (mga#6122) |
155 |
- remove two other "wl" references |
156 |
|
157 |
Version 0.1.306 - 19 August 2012 |
158 |
|
159 |
- pcitable |
160 |
o update ids from x11-driver-video-ati-6.14.6 |
161 |
o update ids from nvidia-current-304.37 |
162 |
- Monitor DB |
163 |
o add Samsung SMS19A100 |
164 |
|
165 |
Version 0.1.305 - 2 July 2012 |
166 |
|
167 |
- update ids from the proprietary nvidia-current-295.59 |
168 |
|
169 |
Version 0.1.304 - 6 June 2012 |
170 |
|
171 |
- update AMD/ATI Cards+ entries from the proprietary driver |
172 |
o HD 4000 and below are no longer supported by it, so the free driver |
173 |
is now always used for those |
174 |
|
175 |
Version 0.1.303 - 13 May 2012 |
176 |
|
177 |
- add another intel id from kernel-3.3.6 |
178 |
- add new NVIDIA ids from the proprietary nvidia-current-295.49 |
179 |
- Monitor DB |
180 |
o add SyncMaster XL2370 (mga#5315) |
181 |
|
182 |
Version 0.1.302 - 2 May 2012 |
183 |
|
184 |
- drop DKMS data about r8192se_pci & rt3090sta* (mga#5681) |
185 |
|
186 |
Version 0.1.301 - 28 April 2012 |
187 |
|
188 |
- use fbdev for "Poulsbo US15W(GMA500)" (mga#5633) |
189 |
|
190 |
Version 0.1.300 - 05 April 2012 |
191 |
|
192 |
- disable nvidia96xx as third driver when nvidia cannot be used due to |
193 |
missing SSE support |
194 |
- refuse to set up nvidia if SSE support is not available |
195 |
- Monitor DB |
196 |
o add BENQ G2320HDB (mga#397) |
197 |
- add new AMD ids from the proprietary and free drivers |
198 |
- add new NVIDIA ids from the proprietary driver |
199 |
- restructure AMD/ATI Cards+ entries for HD 2000 and newer |
200 |
o separate those that support usermode modesetting |
201 |
o add the necessary FIRMWARE and DRIVER_NO_FIRMWARE entries as per |
202 |
mga bug #3466 |
203 |
o do not assign anything to the old unmaintained radeonhd driver |
204 |
- switch NVIDIA NVD9/GF119 cards from vesa to nouveau |
205 |
|
206 |
Version 0.1.299 - 10 December 2011 |
207 |
|
208 |
- Monitor DB |
209 |
o sync with latest Fedora |
210 |
|
211 |
Version 0.1.298 - 10 December 2011 |
212 |
|
213 |
- update pci.ids & usb.ids (mga#3677) |
214 |
|
215 |
Version 0.1.297 - 02 December 2011 |
216 |
|
217 |
- add new ATI ids from the free and proprietary drivers |
218 |
- add new NVIDIA ids from the proprietary driver |
219 |
- disable nvidia173 and nvidia96xx as they do not support X.org server |
220 |
1.11) |
221 |
- add new Intel ids from the i915 driver |
222 |
- switch NVIDIA Fermi (400/500 series) from vesa to nouveau driver |
223 |
except for some PMC.ID 0xd9 cards (GF410/510/520 and Quadro 4200M) |
224 |
that will only get support in kernel 3.2 |
225 |
|
226 |
Version 0.1.296 - 27 November 2011 |
227 |
|
228 |
- add nvidia 0x0df4 (mga#3499) |
229 |
- add Samsung SyncMaster 933SN (mga#1658) |
230 |
|
231 |
Version 0.1.295 - 23 November 2011 |
232 |
|
233 |
- fix for mga #933 must filter on subvendor/subdevice in order to fix |
234 |
mga #1525 |
235 |
|
236 |
Version 0.1.294 - 23 November 2011 |
237 |
|
238 |
- move back ldetect-lst-modules.alias in /lib/module-init-tools/, |
239 |
it needs to be parsed in its own group, so that modprobe.d/*.conf |
240 |
files are preferred over it |
241 |
|
242 |
Version 0.1.293 - 21 November 2011 |
243 |
|
244 |
- add support for virtual gfx card |
245 |
- drop obsolete pcitable.ia64 (either redundant or invalid) |
246 |
- reenable nvidia96xx (support for x.org server 1.10 was added with 96.43.20) |
247 |
- move preferred aliases list back to /etc/modprobe.d |
248 |
(still read before kernel ones) |
249 |
|
250 |
Version 0.1.292 - 01 August 2011 |
251 |
|
252 |
- add new ATI ids from the free and proprietary drivers |
253 |
- add support for all new Intel Sandy Bridge graphics devices (mga#1401) |
254 |
- add support for QXL virtual video card |
255 |
- add support for wl driver (#2266) |
256 |
- disable nvidia96xx (not compatible with x.org server 1.10) |
257 |
- prefer amd74xx module for nForce MCP51 IDE (mga#933, mdv#49957) |
258 |
- switch 1002:9610 back to ati driver (mga #1267) |
259 |
- make the names of the last two Cards using radeonhd/fglrx more specific |
260 |
- make 'MAX' in pnp.ids point to Maxdata (for some Belinea monitors) |
261 |
|
262 |
Version 0.1.291 - 22 March 2011 |
263 |
|
264 |
- add new NVIDIA ids from the proprietary driver |
265 |
- add new ATI ids from the prorietary driver and the free driver |
266 |
- update ATI ids from xf86-video-ati-6.14.1 |
267 |
|
268 |
Version 0.1.290 - 19 December 2010 |
269 |
|
270 |
- add new NVIDIA ids from the proprietary driver |
271 |
- update pci.ids usb.ids oui.txt |
272 |
|
273 |
Version 0.1.289 - 22 October 2010 |
274 |
|
275 |
- add new NVIDIA ids from the proprietary driver |
276 |
- add new ATI ids from the free ati driver and the proprietary driver |
277 |
|
278 |
Version 0.1.288 - 18 August 2010 |
279 |
|
280 |
- update to latest usb.ids from linux-usb.org |
281 |
- add the product names corresponding to the appropriate usb product ids for |
282 |
Samsung's new G4 USB which the firmware fails to provide & identify itself by |
283 |
|
284 |
Version 0.1.287 - 11 June 2010 |
285 |
|
286 |
- add new NVIDIA ids from the proprietary driver (#59714), assigning the |
287 |
Fermi cards to a new GF400+ class for vesa/nvidia-current |
288 |
|
289 |
Version 0.1.286 - 11 May 2010 |
290 |
|
291 |
- switch back 0x10de:0x0110 to using the proprietary driver (#57539) |
292 |
- remove imwheel support (replace with evdev) |
293 |
- switch ATI cards now supported by radeon to it from vesa |
294 |
(HD 5000 series cards) |
295 |
|
296 |
Version 0.1.285 - 30 March 2010 |
297 |
|
298 |
- add new NVIDIA ids from nvidia-current |
299 |
- add new ATI ids from fglrx |
300 |
- switch ATI cards now supported by radeon to it from vesa |
301 |
- re-enable ATI proprietary driver |
302 |
|
303 |
Version 0.1.284 - 25 February 2010 |
304 |
|
305 |
- make imstt cards use vesa driver (imstt driver doesn't exist since 2009.1) |
306 |
- make MediaGX cards use geode instead of cyrix |
307 |
- make Intel Vermilion cards use vesa since vermilion doesn't work |
308 |
- drop vga driver which is no longer working |
309 |
- drop i810 driver which is no longer working |
310 |
- add support for Intel Atom "Pineview G" and "Pineview GM" integrated |
311 |
graphics adapters |
312 |
- add support for desktop and mobile Intel Core i3/i5 integrated |
313 |
graphics adapters |
314 |
- add support for Intel B43 graphics adapter |
315 |
- disable NVidia propretary driver on 0x10de:0x0110 as it segfaults on |
316 |
2010.0 |
317 |
- add new ATI ids from fglrx 8.690 (10.1) |
318 |
|
319 |
Version 0.1.281 - 3 January 2010 |
320 |
|
321 |
- disable ATI propretary driver for now, it doesn't support X.org |
322 |
server 1.7+ |
323 |
- update various ATI ids as per current free driver ID lists (some |
324 |
cards were switched from radeonhd to radeon, and some to vesa) |
325 |
- remove ATI IDs that are not supported by any driver |
326 |
|
327 |
Version 0.1.280 - 24 December 2009 |
328 |
|
329 |
- Monitor DB |
330 |
o add entry for 'Samsung SyncMaster 2233SW (Charles A Edwards) |
331 |
o add entry for 'Samsung SyncMaster 2494HS' (Marek Laane) |
332 |
- add new NVIDIA ids from nvidia-current 190.42 |
333 |
- add new ATI ids from fglrx 8.671, 8.681 assigned to |
334 |
fglrx+radeonhd |
335 |
- switch all HD 5000 series ATI ids from ati to radeonhd |
336 |
- use nouveau as default free driver for NVIDIA cards, except for |
337 |
Riva 128 (NV03) which is not supported by it |
338 |
- re-enable proprietary NVIDIA driver on G105M, issue fixed upstream |
339 |
|
340 |
Version 0.1.279 - 27 October 2009 |
341 |
|
342 |
- really tag for 10de:06ec as not working with nvidia driver (#54862) |
343 |
- use nvidia173 for 10de:2362 (#54768) |
344 |
|
345 |
Version 0.1.278 - 15 October 2009 |
346 |
|
347 |
- select openchrome driver for 0x1106:0x1122 |
348 |
- Monitor DB |
349 |
o add entry for 'Iiyama Prolite E2607WS' (#54225) |
350 |
o add entry for 'MAG LT717s' and default to 1280x1024 (#49656) |
351 |
o add entry for 'Samsung SyncMaster 2343BW' (Dick Gevers) |
352 |
|
353 |
Version 0.1.277 - 8 October 2009 |
354 |
|
355 |
- use lower horizsync for 800x480 (28.8 kHz for WeSurf and Compal Jax10) |
356 |
- add LCD Panel 1366x768 entry (#47706) |
357 |
- add monitor entry for Asus 1101HA (#47706) |
358 |
- add Samsung SyncMaster 732NW (from Sergio Rafael Lemke) |
359 |
- use psb video driver for Intel 0x8108 and 0x8109 |
360 |
|
361 |
Version 0.1.276 - 6 October 2009 |
362 |
|
363 |
- enable to automatically add new ATI cards from |
364 |
dkms-modules-info/dkms-modules.alias where fglrx declares what it |
365 |
supports |
366 |
- add Cards+ entry for Intel Poulsbo US15W (GMA500), using the psb driver |
367 |
- Monitor DB |
368 |
- add Samsung SyncMaster 2243SN (Reinout van Schouwen) |
369 |
|
370 |
Version 0.1.275 - 25 September 2009 |
371 |
|
372 |
- add support for 0x10de:0x06ec (G98M [GeForce G 105M]) which only |
373 |
works with nv (#54000) |
374 |
- add quite a lot of new nvidia cards definition from NV_WHQL.inf from |
375 |
windows driver 186.82) |
376 |
- remove quite a lot of usb devices descriptions that came from usb.ids |
377 |
|
378 |
Version 0.1.274 - 23 September 2009 |
379 |
|
380 |
- radeonhd failed on 0x1002:0x9480 (#53183) |
381 |
|
382 |
Version 0.1.273 - 23 September 2009 |
383 |
|
384 |
- dc2xx is now obsoleted by userspace |
385 |
- drop obsolete 'cs46xx', 'cs5535', 'maestro', 'maestro3', & 'ymfpci' |
386 |
entries |
387 |
|
388 |
Version 0.1.272 - 23 September 2009 |
389 |
|
390 |
- kill all 0x10ec:0x8139:*:* entries (ldetect now try to choose |
391 |
bettwen "8139cp" & "8139too" according to PCI revision like |
392 |
performed by the kernel) (#53349) |
393 |
|
394 |
Version 0.1.271 - 22 September 2009 |
395 |
|
396 |
- auerswald, hp5300, hpusbscsi, rio500 & tiglusb are obsoleted by |
397 |
userspace |
398 |
- fix obsoleted drivers: |
399 |
o CDCEther => cdc_ether |
400 |
o hci_usb => btusb |
401 |
o mtouchusb => usbtouchscreen |
402 |
o ov518_decomp => gspca_ov519 |
403 |
o phidgetservo => hid |
404 |
o touchkitusb => usbtouchscreen |
405 |
|
406 |
Version 0.1.270 - 22 September 2009 |
407 |
|
408 |
- fix obsoleted drivers: |
409 |
o b2c2_usb => b2c2-flexcop-usb |
410 |
o cy82c693 => pata_cypress |
411 |
o dtc => initio |
412 |
o generic => ata_generic and ide-pci-generic |
413 |
o maestro3 => snd_maestro3 |
414 |
o snd_gina3g => snd-echo3g |
415 |
o sonypi => i2c-piix4 |
416 |
o sonicvibes => snd-sonicvibes |
417 |
|
418 |
Version 0.1.269 - 22 September 2009 |
419 |
|
420 |
- add new ATI ids from fglrx |
421 |
- mod_quicikame doesn't exist anymore (#52176) |
422 |
- tag one more "nVidia Geforce2 MX/MX" as GeForce 3 so that it can |
423 |
uses 3D (#53841) |
424 |
|
425 |
Version 0.1.268 - 18 September 2009 |
426 |
|
427 |
- fix 2 Matrox entries |
428 |
- Monitor DB |
429 |
o sync with latest Fedora (new Dell monitors) |
430 |
|
431 |
Version 0.1.267 - 18 September 2009 |
432 |
|
433 |
- add support for the last missing from Matrox card |
434 |
- fix invalid Horzsync for 6 'Generic CRT Display; Monitor' and a |
435 |
couple Acer & Philips monitors (#48063) |
436 |
- use fglrx again with ATI Mobility Radeon HD 3400 (now working) |
437 |
|
438 |
Version 0.1.266 - 15 September 2009 |
439 |
|
440 |
- sync ati list with latest driver |
441 |
|
442 |
Version 0.1.265 - 15 September 2009 |
443 |
|
444 |
- sync nvidia list with latest driver |
445 |
|
446 |
Version 0.1.264 - 15 September 2009 |
447 |
|
448 |
- add support for one Matrox card (#53564) |
449 |
|
450 |
Version 0.1.263 - 9 September 2009 |
451 |
|
452 |
- add support for ION video card (#53515) |
453 |
- Monitor DB |
454 |
o sync with latest Fedora (new Dell monitors) |
455 |
|
456 |
Version 0.1.262 - 13 August 2009 |
457 |
|
458 |
- update usbtable to get proper descriptions for USB devices |
459 |
- add GeForce 9400 (nvidia-current / vesa) |
460 |
- use newer intel driver for 8086:3582:1179:0002, fixes bug #44371 |
461 |
- do not choose siimage when pata_sil680 works too since the former |
462 |
seems no longuer to work (#52736) |
463 |
- fix loading '8139too' over '8139cp' on 10ec:8139:5853:0001 (#51520) |
464 |
|
465 |
Version 0.1.261 - 23 April 2009 |
466 |
|
467 |
- propagate the following changes from anssi (2009-04-01) into |
468 |
pcitable.x86_64 too, thus fixing wrongly using 'vesa' driver on some |
469 |
machines: |
470 |
o prefer "ati"/"radeon" driver over "radeonhd" |
471 |
o add new ATI ids from fglrx, ati and radeonhd |
472 |
o do not use fglrx with old Radeon cards |
473 |
|
474 |
Version 0.1.260 - 21 April 2009 |
475 |
|
476 |
- Monitor DB |
477 |
o sync with latest Fedora (new Dell monitors) |
478 |
- drop amd64_agp entries (#43870) |
479 |
|
480 |
Version 0.1.259 - 20 April 2009 |
481 |
|
482 |
- fix preferring pata_marvell over ahci (#43975) |
483 |
|
484 |
Version 0.1.258 - 1 April 2009 |
485 |
|
486 |
- do not try to use nv for 0x10de:0x053e (#48684) |
487 |
- do not use fglrx with ATI Mobility Radeon HD 3400 (Andriy Rysin reported |
488 |
a failure with fglrx 8.600) |
489 |
- Monitor DB |
490 |
o add Samsung SyncMaster 2043NW (Jaanus Ojangu) |
491 |
- prefer pata_marvell over ahci since ahci need marvel_enabled=1 to make it work (#43975) |
492 |
- prism2_plx was removed from kernel, switch the only entry that was |
493 |
using it to orinoco_tmd (0x15e8:0x0131) |
494 |
- remove dpc7146 entry since it was dropped from kernel |
495 |
- use radeonhd instead of ati for ATI Radeon HD 3200 0x9610 (#49824) |
496 |
|
497 |
Version 0.1.257 - 1 April 2009 |
498 |
|
499 |
- only use Intel 810 for a specic subvendor/subdevice of 0x8086:0x3582 |
500 |
- Monitor DB |
501 |
o add a lot of Proview monitors (Yannick56, #49104) |
502 |
o add Samsung SyncMaster 2253BW |
503 |
- prefer "ati"/"radeon" driver over "radeonhd" |
504 |
- add new ATI ids from fglrx, ati and radeonhd |
505 |
- do not use fglrx with old Radeon cards |
506 |
- add "GeForce (nouveau driver, experimental)" to allow users to test nouveau |
507 |
by selecting it in XFdrake |
508 |
|
509 |
Version 0.1.256 - 24 March 2009 |
510 |
|
511 |
- fix driver for "nVidia Corporation|NV11 [GeForce2 MX/MX 400]" (#48928) |
512 |
- add new NVIDIA ids from 180.41 |
513 |
- use e100 instead of eepro100 since kernel team disabled the latest (#49085) |
514 |
- Monitor DB |
515 |
o add Sony TV Bravia KDL-32D3000 (fcrozat) |
516 |
o add Samsung SyncMaster 2053BW (dams) |
517 |
|
518 |
Version 0.1.255 - 18 March 2009 |
519 |
|
520 |
- re-enable fglrx driver |
521 |
- use (old) Intel 810 driver for 0x8086:0x3582, fixes bug #44371 |
522 |
|
523 |
Version 0.1.254 - 16 March 2009 |
524 |
|
525 |
- Monitor DB |
526 |
o add Acer AL1716 (Steve Morris) |
527 |
o add Iiyama Prolite H481S (aapgorilla) |
528 |
o add Packard Bell Viseo 223Ws (patrick) |
529 |
|
530 |
Version 0.1.253 - 5 March 2009 |
531 |
|
532 |
- disable fglrx and nvidia71xx as they do not support X.org server 1.6 |
533 |
(IgnoreABI does not work for them) |
534 |
- use nvidia173 for non-SSE processors as well, the support was restored |
535 |
- Monitor DB |
536 |
o add back "LCD Panel 800x480" |
537 |
o add ViewSonic VX2260WM (Donald Stewart) |
538 |
o sync with latest Fedora |
539 |
|
540 |
Version 0.1.252 - 29 January 2009 |
541 |
|
542 |
- add new NVIDIA cards supported in 180.25 |
543 |
|
544 |
Version 0.1.251 - 16 January 2009 |
545 |
|
546 |
- re-work the blacklist of cards that don't work with nv to be |
547 |
more general and include more confirmed IDs |
548 |
|
549 |
Version 0.1.250 - 11 January 2009 |
550 |
|
551 |
- add NVIDIA GeForce 9400 GT ID, adjust 7050 group to include it |
552 |
(doesn't work with nv) |
553 |
|
554 |
Version 0.1.249 - 23 December 2008 |
555 |
|
556 |
- add new NVIDIA IDs from 180.18 |
557 |
- add new ATI IDs from 8.12 |
558 |
|
559 |
Version 0.1.248 - 3 December 2008 |
560 |
|
561 |
- Monitor DB |
562 |
o remove duplicated entries |
563 |
o sync with latest Fedora |
564 |
|
565 |
Version 0.1.247 - 2 December 2008 |
566 |
|
567 |
- Monitor DB |
568 |
o further sync with Fedora |
569 |
|
570 |
Version 0.1.246 - 2 December 2008 |
571 |
|
572 |
- fix "INTERNAL ERROR: good_default_monitor (Generic|*) is unknown in |
573 |
MonitorsDB" after syncing with redhat |
574 |
|
575 |
Version 0.1.245 - 29 November 2008 |
576 |
|
577 |
- NSC chips now use geode driver, nsc driver no longer builds |
578 |
- drop the special case for VIA K8M800, works OK with openchrome now |
579 |
- add new NVIDIA and ATI IDs from new driver versions |
580 |
- add "Flat Panel 1600x900" (#45091) |
581 |
- Monitor DB |
582 |
o sync monitor vendor names with Fedora |
583 |
o partial sync with Fedora |
584 |
- use "i810" instead of "intel" driver on older i810 because it |
585 |
segfaults when using XAA acceleration (#43916) |
586 |
|
587 |
Version 0.1.244 - 13 November 2008 |
588 |
|
589 |
- add new mouse definition (Logitech G5v2) |
590 |
- vesa not framebuffer for ST Kyro, per dams |
591 |
- disable 3D on ATI Rage 128-based cards (hard lock the machine on |
592 |
x86_64) |
593 |
- use pata_cs5536 for Geode IDE controllers |
594 |
- default to 800x480 on TECO TR2350 (Omatek netbook) |
595 |
|
596 |
Version 0.1.243 - 01 October 2008 |
597 |
|
598 |
- updated DKMS alias DB |
599 |
|
600 |
Version 0.1.242 - 01 October 2008 |
601 |
|
602 |
- drop separate Radeon HD 4xxx category: radeonhd supports these now |
603 |
|
604 |
Version 0.1.241 - 30 September 2008 |
605 |
|
606 |
- add ID 0605 for NVIDIA GeForce 9800 GT (reported and tested by Zoida A) |
607 |
|
608 |
Version 0.1.240 - 25 September 2008 |
609 |
|
610 |
- update dkms modules info |
611 |
|
612 |
Version 0.1.239 - 18 September 2008 |
613 |
|
614 |
- update dkms modules info (mainly for rt2860 and rtl8187se) |
615 |
|
616 |
Version 0.1.238 - 18 September 2008 |
617 |
|
618 |
- add support for Intel G41 graphics adapter |
619 |
- use 'vesa' driver not 'nv' for GeForce 7050 (#38391) |
620 |
|
621 |
Version 0.1.237 - 4 September 2008 |
622 |
|
623 |
- use pata_jmicron for jmicron controllers |