mgagit/templates/gitolite.rc

# configuration variables for gitolite

# This file is in perl syntax.  But you do NOT need to know perl to edit it --
# just mind the commas, use single quotes unless you know what you're doing,
# and make sure the brackets and braces stay matched up!

# (Tip: perl allows a comma after the last item in a list also!)

# HELP for commands can be had by running the command with "-h".

# HELP for all the other FEATURES can be found in the documentation (look for
# "list of non-core programs shipped with gitolite" in the master index) or
# directly in the corresponding source file.

%RC = (

    # ------------------------------------------------------------------

    # default umask gives you perms of '0700'; see the rc file docs for
    # how/why you might change this
    UMASK                           =>  0022,

    # look for "git-config" in the documentation
    GIT_CONFIG_KEYS                 =>  'gitweb\.description gitweb\.owner multimailhook\.mailingList multimailhook\.emailDomain multimailhook\.envelopeSender',

    # comment out if you don't need all the extra detail in the logfile
    LOG_EXTRA                       =>  1,

    # roles.  add more roles (like MANAGER, TESTER, ...) here.
    #   WARNING: if you make changes to this hash, you MUST run 'gitolite
    #   compile' afterward, and possibly also 'gitolite trigger POST_COMPILE'
    ROLES => {
        READERS                     =>  1,
        WRITERS                     =>  1,
    },

    # ------------------------------------------------------------------

    # rc variables used by various features

    # the 'info' command prints this as additional info, if it is set
        # SITE_INFO                 =>  'Please see http://blahblah/gitolite for more help',

    # the 'desc' command uses this
        # WRITER_CAN_UPDATE_DESC    =>  1,

    # the CpuTime feature uses these
        # display user, system, and elapsed times to user after each git operation
        # DISPLAY_CPU_TIME          =>  1,
        # display a warning if total CPU times (u, s, cu, cs) crosses this limit
        # CPU_TIME_WARN_LIMIT       =>  0.1,

    # the Mirroring feature needs this
        # HOSTNAME                  =>  "foo",

    # if you enabled 'Shell', you need this
        # SHELL_USERS_LIST          =>  "$ENV{HOME}/.gitolite.shell-users",

    # ------------------------------------------------------------------

    # List of commands and features to enable

    ENABLE => [

        # COMMANDS

            # These are the commands enabled by default
            'help',
            'desc',
            'info',
            'perms',
            'writable',

            # Uncomment or add new commands here.
            # 'create',
            # 'fork',
            # 'mirror',
            # 'sskm',
            # 'D',

        # These FEATURES are enabled by default.

            # essential (unless you're using smart-http mode)
            'ssh-authkeys',

            # creates git-config enties from gitolite.conf file entries like 'config foo.bar = baz'
            'git-config',

            # creates git-daemon-export-ok files; if you don't use git-daemon, comment this out
            'daemon',

            # creates projects.list file; if you don't use gitweb, comment this out
            'gitweb',

        # These FEATURES are disabled by default; uncomment to enable.  If you
        # need to add new ones, ask on the mailing list :-)

        # user-visible behaviour

            # prevent wild repos auto-create on fetch/clone
            # 'no-create-on-read',
            # no auto-create at all (don't forget to enable the 'create' command!)
            # 'no-auto-create',

            # access a repo by another (possibly legacy) name
            # 'Alias',

            # give some users direct shell access
            # 'Shell',

            # set default roles from lines like 'option default.roles-1 = ...', etc.
            # 'set-default-roles',

        # system admin stuff

            # enable mirroring (don't forget to set the HOSTNAME too!)
            # 'Mirroring',

            # allow people to submit pub files with more than one key in them
            # 'ssh-authkeys-split',

            # selective read control hack
            # 'partial-copy',

            # manage local, gitolite-controlled, copies of read-only upstream repos
            # 'upstream',

            # updates 'description' file instead of 'gitweb.description' config item
            'cgit',

        # performance, logging, monitoring...

            # be nice
            # 'renice 10',

            # log CPU times (user, system, cumulative user, cumulative system)
            # 'CpuTime',

        # syntactic_sugar for gitolite.conf and included files

            # allow backslash-escaped continuation lines in gitolite.conf
            # 'continuation-lines',

            # create implicit user groups from directory names in keydir/
            # 'keysubdirs-as-groups',

            # allow simple line-oriented macros
            # 'macros',

    ],

);

# ------------------------------------------------------------------------------
# per perl rules, this should be the last line in such a file:
1;

# Local variables:
# mode: perl
# End:
# vim: set syn=perl:
1	boklm	3258	# configuration variables for gitolite
2
3			# This file is in perl syntax. But you do NOT need to know perl to edit it --
4			# just mind the commas, use single quotes unless you know what you're doing,
5			# and make sure the brackets and braces stay matched up!
6
7			# (Tip: perl allows a comma after the last item in a list also!)
8
9			# HELP for commands can be had by running the command with "-h".
10
11			# HELP for all the other FEATURES can be found in the documentation (look for
12			# "list of non-core programs shipped with gitolite" in the master index) or
13			# directly in the corresponding source file.
14
15			%RC = (
16
17			# ------------------------------------------------------------------
18
19			# default umask gives you perms of '0700'; see the rc file docs for
20			# how/why you might change this
21	boklm	3259	UMASK => 0022,
22	boklm	3258
23			# look for "git-config" in the documentation
24	colin	3460	GIT_CONFIG_KEYS => 'gitweb\.description gitweb\.owner multimailhook\.mailingList multimailhook\.emailDomain multimailhook\.envelopeSender',
25	boklm	3258
26			# comment out if you don't need all the extra detail in the logfile
27			LOG_EXTRA => 1,
28
29			# roles. add more roles (like MANAGER, TESTER, ...) here.
30			# WARNING: if you make changes to this hash, you MUST run 'gitolite
31			# compile' afterward, and possibly also 'gitolite trigger POST_COMPILE'
32			ROLES => {
33			READERS => 1,
34			WRITERS => 1,
35			},
36
37			# ------------------------------------------------------------------
38
39			# rc variables used by various features
40
41			# the 'info' command prints this as additional info, if it is set
42			# SITE_INFO => 'Please see http://blahblah/gitolite for more help',
43
44			# the 'desc' command uses this
45			# WRITER_CAN_UPDATE_DESC => 1,
46
47			# the CpuTime feature uses these
48			# display user, system, and elapsed times to user after each git operation
49			# DISPLAY_CPU_TIME => 1,
50			# display a warning if total CPU times (u, s, cu, cs) crosses this limit
51			# CPU_TIME_WARN_LIMIT => 0.1,
52
53			# the Mirroring feature needs this
54			# HOSTNAME => "foo",
55
56			# if you enabled 'Shell', you need this
57			# SHELL_USERS_LIST => "$ENV{HOME}/.gitolite.shell-users",
58
59			# ------------------------------------------------------------------
60
61			# List of commands and features to enable
62
63			ENABLE => [
64
65			# COMMANDS
66
67			# These are the commands enabled by default
68			'help',
69			'desc',
70			'info',
71			'perms',
72			'writable',
73
74			# Uncomment or add new commands here.
75			# 'create',
76			# 'fork',
77			# 'mirror',
78			# 'sskm',
79			# 'D',
80
81			# These FEATURES are enabled by default.
82
83			# essential (unless you're using smart-http mode)
84			'ssh-authkeys',
85
86			# creates git-config enties from gitolite.conf file entries like 'config foo.bar = baz'
87			'git-config',
88
89			# creates git-daemon-export-ok files; if you don't use git-daemon, comment this out
90			'daemon',
91
92			# creates projects.list file; if you don't use gitweb, comment this out
93			'gitweb',
94
95			# These FEATURES are disabled by default; uncomment to enable. If you
96			# need to add new ones, ask on the mailing list :-)
97
98			# user-visible behaviour
99
100			# prevent wild repos auto-create on fetch/clone
101			# 'no-create-on-read',
102			# no auto-create at all (don't forget to enable the 'create' command!)
103			# 'no-auto-create',
104
105			# access a repo by another (possibly legacy) name
106			# 'Alias',
107
108			# give some users direct shell access
109			# 'Shell',
110
111			# set default roles from lines like 'option default.roles-1 = ...', etc.
112			# 'set-default-roles',
113
114			# system admin stuff
115
116			# enable mirroring (don't forget to set the HOSTNAME too!)
117			# 'Mirroring',
118
119			# allow people to submit pub files with more than one key in them
120			# 'ssh-authkeys-split',
121
122			# selective read control hack
123			# 'partial-copy',
124
125			# manage local, gitolite-controlled, copies of read-only upstream repos
126			# 'upstream',
127
128			# updates 'description' file instead of 'gitweb.description' config item
129	boklm	3260	'cgit',
130	boklm	3258
131			# performance, logging, monitoring...
132
133			# be nice
134			# 'renice 10',
135
136			# log CPU times (user, system, cumulative user, cumulative system)
137			# 'CpuTime',
138
139			# syntactic_sugar for gitolite.conf and included files
140
141			# allow backslash-escaped continuation lines in gitolite.conf
142			# 'continuation-lines',
143
144			# create implicit user groups from directory names in keydir/
145			# 'keysubdirs-as-groups',
146
147			# allow simple line-oriented macros
148			# 'macros',
149
150			],
151
152			);
153
154			# ------------------------------------------------------------------------------
155			# per perl rules, this should be the last line in such a file:
156			1;
157
158			# Local variables:
159			# mode: perl
160			# End:
161			# vim: set syn=perl: